Brackets and mounts
twin lobe bracket
- Bounding box
- 150.4 × 151.3 × 45 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D bracket on XY plane (Z=0). Top cylinder at (0,0), outer diameter 80.54 mm, inner hole 27.00 mm, height from Z=-17 to Z=+25 mm. Two bottom cylinders at 28 degrees left and right of negative Y-axis, distance 98.00 mm from origin, outer diameter 49.09 mm, inner hole 24.55 mm, height from Z=-20 to Z=+19 mm. Connect them with a central plate from Z=-6.5 to Z=+6.5 mm using outer tangent arcs of radius 107.80 mm and bottom concave arc of radius 25.76 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 80.54 mm | 20 – 200 |
| Inner hole diameter | 27 mm | 0 – 100 |
| Bottom Z | -17 mm | -50 – 50 |
| Top Z | 25 mm | -50 – 100 |
| Outer diameter | 49.09 mm | 10 – 120 |
| Inner hole diameter | 24.55 mm | 0 – 100 |
| Angle each side of -Y | 28 deg | 0 – 80 |
| Center distance from origin | 98 mm | 20 – 200 |
| Bottom Z | -20 mm | -50 – 50 |
| Top Z | 19 mm | -50 – 100 |
| Plate bottom Z | -6.5 mm | -20 – 20 |
| Plate top Z | 6.5 mm | -20 – 20 |
| Side tangent arc radius | 107.8 mm | 20 – 500 |
| Bottom concave arc radius | 25.76 mm | 2 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
