Enclosures and housings
Twin HGR35 LM Slide on Item Line 8 Base
- Bounding box
- 160.0 × 320.0 × 83.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
I want to build a Lm slide having meter travel. Base of slide is Item Line 8 profile 160x320 mm. Use HGR 35 guides in twin configuration .
Parameters
| Name | Value | Range |
|---|---|---|
| Base width (X) | 160 mm | 80 – 400 |
| Base length (Y) | 320 mm | 160 – 2400 |
| Base thickness | 20 mm | 10 – 60 |
| T-slot opening width | 10 mm | 4 – 20 |
| T-slot opening depth | 5 mm | 2 – 20 |
| T-slot cavity width | 14 mm | 6 – 40 |
| T-slot cavity depth | 5 mm | 2 – 20 |
| Base mounting hole dia | 9 mm | 3 – 20 |
| Base hole end margin | 14 mm | 6 – 60 |
| Rail spacing (centre-centre) | 80 mm | 30 – 160 |
| Rail length | 260 mm | 80 – 2300 |
| Rail width | 34 mm | 15 – 60 |
| Rail height | 30 mm | 10 – 60 |
| Rail hole pitch | 40 mm | 15 – 80 |
| Rail bolt hole dia | 9 mm | 3 – 16 |
| Rail counterbore dia | 15 mm | 6 – 26 |
| Rail counterbore depth | 6 mm | 2 – 14 |
| Carriage block width | 70 mm | 25 – 140 |
| Carriage block length | 112 mm | 30 – 260 |
| Carriage block height | 48 mm | 15 – 100 |
| Top plate width | 160 mm | 50 – 320 |
| Top plate length | 160 mm | 50 – 320 |
| Top plate thickness | 15 mm | 4 – 40 |
| Payload hole dia | 8 mm | 3 – 16 |
| Payload hole edge inset | 25 mm | 8 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no