Enclosures and housings
Twin Autonomous Catamaran Surface Robots in Formation
- Bounding box
- 400.0 × 725.0 × 218.6 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
A pair of identical small autonomous catamaran surface robots floating on calm water, twin cylindrical hulls with a flat deck bridging them, a sealed electronics box on the deck, two small underwater thrusters at the stern, a slim sensor strut hanging below the centre into the water, a GPS antenna and a small radio antenna on top. Clean modern marine-robotics engineering design, matte navy blue and teal hulls with gold accents. Two boats spaced apart on the water with a faint dotted line between them suggesting they cooperate. Soft daylight, calm lake, shallow depth of field, product-render style, high detail, 3/4 front view. No text, no labels.
Parameters
| Name | Value | Range |
|---|---|---|
| Hull Length | 400 mm | 150 – 800 |
| Hull Diameter | 60 mm | 20 – 150 |
| Hull Centre Spacing | 140 mm | 40 – 400 |
| Deck Length | 260 mm | 80 – 600 |
| Deck Width | 180 mm | 40 – 400 |
| Deck Thickness | 8 mm | 2 – 30 |
| Deck Sink Into Hulls | 1.5 mm | 0 – 10 |
| Electronics Box Length | 140 mm | 40 – 400 |
| Electronics Box Width | 90 mm | 30 – 300 |
| Electronics Box Height | 60 mm | 15 – 200 |
| Sensor Strut Diameter | 14 mm | 4 – 60 |
| Sensor Strut Depth Below Deck | 70 mm | 10 – 250 |
| GPS Dome Diameter | 40 mm | 10 – 120 |
| GPS Dome Height | 22 mm | 5 – 80 |
| Radio Whip Length | 70 mm | 10 – 300 |
| Radio Whip Diameter | 3 mm | 1 – 20 |
| Thruster Length | 60 mm | 15 – 200 |
| Thruster Diameter | 26 mm | 8 – 80 |
| Gold Band Width | 12 mm | 3 – 60 |
| Gold Band Thickness | 2.5 mm | 0.5 – 10 |
| Boat Centre Spacing | 520 mm | 200 – 1500 |
| Link Dash Length | 20 mm | 4 – 80 |
| Link Dash Gap | 14 mm | 2 – 80 |
| Link Dash Width | 3 mm | 1 – 20 |
| Link Dash Thickness | 0.8 mm | 0.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,