Enclosures and housings
TV Week Award Statuette
- Bounding box
- 78 × 70 × 160.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D printable trophy statuette. The design consists of three connected parts: 1. A thick, solid circular cylinder base at the bottom. 2. A smooth, vertical stylized inverted Y-shape body standing on the center of the base. 3. A flat rectangular block attached to the upper right side of the vertical body. The front face of the rectangular block has deeply extruded, raised 3D text that reads 'TV WEEK'. The entire model must be a single, solid, watertight manifold object with a flat bottom surface optimized for 3D printing
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 70 mm | 40 – 120 |
| Base height | 20 mm | 10 – 50 |
| Total height | 160 mm | 80 – 300 |
| Body diameter | 18 mm | 8 – 50 |
| Leg spread | 30 mm | 10 – 60 |
| Sign width | 38 mm | 20 – 80 |
| Sign height | 30 mm | 15 – 60 |
| Sign thickness | 4 mm | 1.2 – 8 |
| Sign center height | 105 mm | 50 – 250 |
| Sign X offset from center | 24 mm | 5 – 60 |
| Sign corner rounding | 1.5 mm | 0 – 5 |
| Raised text depth | 1.2 mm | 0.6 – 3 |
| "TV" text height | 9 mm | 3 – 20 |
| "WEEK" text height | 7 mm | 3 – 20 |
| Gap between text lines | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,