3D preview of Turbine Blade with Two Internal Cooling Passages
Loading the interactive model…
Interactive 3D model of Turbine Blade with Two Internal Cooling Passages

Enclosures and housings

Turbine Blade with Two Internal Cooling Passages

1 views
Bounding box
30.0 × 5.0 × 40.0 mm
Engine
Precision B-rep
Parameters
6
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a simplified 3D gas turbine rotor blade for an academic CFD project focused on internal turbine blade cooling using ANSYS Fluent. IMPORTANT: Follow ALL dimensions exactly as specified below. Do not estimate, modify, scale, optimize, or substitute any dimension. All dimensions are in millimeters. 1. OUTER BLADE GEOMETRY: - Blade height (span): 40 mm. - Blade axial chord: 30 mm. - Maximum blade thickness: 5 mm. - Constant airfoil cross-section along the entire span. - No blade twist. - No taper. - No shroud. - No root platform. - Use a simple symmetrical airfoil profile with a rounded leading edge and a sharp trailing edge. - Keep the geometry simple and smooth. 2. INTERNAL COOLING SYSTEM: Create exactly TWO straight, parallel cylindrical internal cooling passages. - Cooling passage diameter: 2.0 mm. - Number of passages: 2. - Passage center-to-center distance: 8.0 mm. - Both passages must extend through the full 40 mm blade span. - Both passages must be parallel to the blade span direction. - Both passages must be straight. - No bends. - No ribs. - No turbulators. - No additional internal cavities. 3. MATERIAL DOMAIN: - Create one solid blade body. - Create one separate coolant fluid body representing the internal air passages. - The coolant volume must be connected and watertight. - Ensure that the blade and coolant volumes do not overlap. - Preserve the exact 2.0 mm passage diameter. 4. CAD SIMPLICITY: - Use only basic geometric features. - Avoid unnecessary fillets and small details. - Do not add any holes other than the two cooling passage openings. - Ensure the model is suitable for CFD meshing. - Maintain a minimum solid wall thickness of 1.0 mm wherever geometrically possible. 5. EXPORT: - Export as STEP (.stp). - Preserve separate blade and coolant bodies. - Provide the original editable parametric CAD model. - Provide a dimensioned engineering drawing. - Report the actual measured dimensions after generation. 6. VALIDATION: Before exporting, verify: - Blade height = 40 mm. - Blade chord = 30 mm. - Maximum thickness = 5 mm. - Cooling passage diameter = 2.0 mm. - Number of cooling passages = exactly 2. - Center-to-center spacing = 8.0 mm. - Both passages extend through the full blade span. If any dimension cannot be satisfied, report the issue instead of silently changing the geometry. Do not add any features that are not explicitly requested.

Parameters

NameValueRange
Blade Span (radial height)40 mm10 – 120
Axial Chord30 mm10 – 100
Maximum Airfoil Thickness5 mm2 – 30
Cooling Passage Diameter2 mm0.5 – 6
Passage Center-to-Center Spacing8 mm2 – 40
Passage Pair Midpoint from LE10 mm0 – 100

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Oval Safety Snap Carabiner46.5 × 12.0 × 80.0 mmPrecision

Oval Safety Snap Carabiner

Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.

STEPSTLGLB7 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
Turbine Blade with Two Internal Cooling Passages - Free CAD Model (STEP, STL) | TextoCAD