Enclosures and housings
Tunnel Sleeve with Floor Extension and End Plate
- Bounding box
- 155.0 × 240.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
Prompt for Item 1 (Tunnel Sleeve) "Create a 3D model of a rectangular tunnel sleeve with outer dimensions of 150mm wide, 100mm tall, and 120mm long. Wall thickness must be 4mm, open at both ends. Extend the bottom floor plate at one end by an extra 60mm along the length (total floor length 180mm). At the opposite end, add a flat solid end-wall plate measuring 155mm wide x 105mm tall, centered to create a 2.5mm overhang on all four outer edges."
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 150 mm | 100 – 300 |
| Outer Height | 100 mm | 60 – 200 |
| Sleeve Length | 120 mm | 50 – 250 |
| Wall Thickness | 4 mm | 1 – 12 |
| Floor Extension | 60 mm | 0 – 150 |
| End Plate Overhang | 2.5 mm | 0 – 15 |
| End Plate Thickness | 4 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no