Brackets and mounts
TRIVOICE 2.0 Two-Unit Enclosure + M3 Screw
- Bounding box
- 625.5 × 90.0 × 29.6 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
# PROJECT: TRIVOICE 2.0 — TWO-UNIT ENCLOSURE You are my mechanical CAD designer. Create a complete, editable, 3D-printable enclosure based on my reference image. ## 1. Overall appearance - Two matching compact communication devices. - External dimensions of EACH unit: 130 mm × 90 mm × 32 mm. - Slim, rounded rectangular shape. - Purple upper lid and black lower base. - Match the proportions, appearance and feature placement of my uploaded reference image as closely as possible. - Both units must have identical external dimensions and appearance. ## 2. Lid design - Four circular button holes in one straight front row. - Speaker grille on the left side. - Small microphone grille on the right side. - Central TRIVOICE 2.0 branding. - Rounded corners, approximately 8 mm radius. - Lid thickness approximately 2.4 mm. - Include an underside locating skirt for alignment with the base. ## 3. Base design - Hollow electronics enclosure. - Approximately 2 mm side walls. - Approximately 2.2 mm bottom floor. - Internal mounting posts and generic support rails. - Integrated mounting features instead of requiring separate mounting spacers. - Four lid fastening positions. - Rear wire-routing provision. - Keep the interior as spacious as possible. ## 4. Components to accommodate The project uses: - ESP32 development board - DFPlayer Mini - MAX98357A amplifier - INMP441 microphone - DPDT relay - MicroSD module - Four push buttons - Internal wiring and speaker connections Use generic internal supports for now. Do not invent exact component mounting-hole positions. ## 5. Required separate CAD parts Generate separate editable parts for: 1. Unit A black base 2. Unit A purple lid 3. Unit B black base 4. Unit B purple lid 5. Separate printable screw prototype Both units must have matching external geometry. ## 6. Manufacturing requirements - Units must be millimetres. - All parts must be watertight, manifold solids. - Avoid floating geometry and self-intersections. - Include reasonable 3D-printing clearances. - Make the lid and base separate printable parts. - Keep the screw and its matching fastening geometry compatible. - Check that the assembled external dimensions are 130 × 90 × 32 mm. ## 7. Deliverables Export: - Individual STL files for all five parts. - Editable STEP files if supported. - Original editable CAD source. - A rendered assembled preview showing the purple and black colour combination. Before exporting, inspect the model and report any dimensions or features that need physical verification. Do not replace the enclosure with a decorative sculpture or an unprintable mesh. I need functional mechanical CAD geometry for an actual electronics project.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 130 mm | 60 – 300 |
| Enclosure Width | 90 mm | 50 – 250 |
| Base Height | 29.6 mm | 10 – 120 |
| Lid Top Thickness | 2.4 mm | 1.2 – 8 |
| Corner Radius | 8 mm | 1 – 30 |
| Side Wall | 2 mm | 0.8 – 6 |
| Floor Thickness | 2.2 mm | 0.8 – 8 |
| Lid Skirt Clearance | 0.4 mm | 0.1 – 1.5 |
| Fastening Boss Diameter | 6.5 mm | 3 – 15 |
| Fastening Boss Height | 26.4 mm | 4 – 120 |
| Screw Pilot Hole | 2.8 mm | 1 – 8 |
| Pilot Hole Depth | 9 mm | 1 – 30 |
| Support Rail Length | 100 mm | 10 – 280 |
| Support Rail Height | 6 mm | 0.5 – 40 |
| Support Rail Width | 1.6 mm | 0.4 – 8 |
| Rail Spacing (Y) | 24 mm | 2 – 200 |
| Mounting Post Diameter | 5 mm | 1 – 20 |
| Mounting Post Height | 7 mm | 0.5 – 40 |
| Rear Cable Opening Width | 30 mm | 2 – 100 |
| Rear Cable Opening Height | 10 mm | 2 – 40 |
| Locating Skirt Height | 5 mm | 1 – 20 |
| Locating Skirt Wall | 1.5 mm | 0.6 – 5 |
| Button Hole Diameter | 12 mm | 2 – 30 |
| Button Spacing | 26 mm | 8 – 60 |
| Button Row From Front Edge | 18 mm | 5 – 44 |
| Speaker Grille X | -46 mm | -60 – 0 |
| Microphone Grille X | 46 mm | 0 – 60 |
| Grille Row Y | 8 mm | -40 – 40 |
| Speaker Hole Pitch | 4 mm | 2 – 12 |
| Speaker Hole Diameter | 2.2 mm | 0.6 – 6 |
| Mic Hole Pitch | 3 mm | 1.5 – 12 |
| Mic Hole Diameter | 1.4 mm | 0.5 – 5 |
| Branding Panel Width | 60 mm | 10 – 120 |
| Branding Panel Depth (Y) | 14 mm | 4 – 60 |
| Branding Panel Y | 10 mm | -40 – 40 |
| Branding Recess Depth | 0.6 mm | 0.2 – 2 |
| Lid Screw Clearance Hole | 3.4 mm | 1.5 – 10 |
| Lid Counterbore Diameter | 6.2 mm | 2 – 15 |
| Lid Counterbore Depth | 1.6 mm | 0.2 – 6 |
| Screw Shank Diameter | 2.8 mm | 1 – 8 |
| Screw Length | 10 mm | 3 – 60 |
| Pan Head Diameter | 5.5 mm | 2 – 20 |
| Pan Head Height | 1.8 mm | 0.4 – 8 |
| Hex Socket Across Flats | 2.5 mm | 1 – 8 |
| Hex Socket Depth | 1.2 mm | 0.2 – 5 |
| Exploded Layout Gap | 25 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
