115200.136.6
Loading the interactive model…
Interactive 3D model of Trivoice 2.0 - Integrated Microphone Holder Revision

Brackets and mounts

Trivoice 2.0 - Integrated Microphone Holder Revision

1 views
Bounding box
200.1 × 115 × 36.6 mm
Engine
3D Printing B-rep
Parameters
15
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

Edit the existing Trivoice 2.0 enclosure file. Main requested change: replace the floating/gapped INMP441 lid holder with a fused-to-lid annular mounting floor, open 8x8 mm acoustic centre aligned with the 4.5 mm lid inlet, close-fitting raised perimeter rails and four small inward retaining lips. Preserve all other base, lid, hook, speaker, button, USB and component clamp geometry unchanged. PCB assumed 15x11x1.6 mm with centred acoustic port.

Parameters

NameValueRange
Outer length200 mm190 – 220
Outer width115 mm95 – 120
Base height31 mm27 – 40
Wall thickness2.4 mm1.6 – 4
Floor thickness2.4 mm1.6 – 4
Corner radius6 mm3 – 10
Breadboard length170 mm160 – 180
Breadboard width60 mm55 – 70
M3 self-tapping screw pilot hole2.5 mm2.2 – 3
Speaker long side50 mm45 – 60
Speaker short side45 mm40 – 55
M3 clearance hole3.4 mm3.2 – 4
Panel-mount button hole12.2 mm8 – 16
Horizontal opening width10.5 mm8 – 14
Opening height4.5 mm3 – 7

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Trivoice 2.0 - Integrated Microphone Holder Revision - Free CAD Model (STEP, STL) | TextoCAD