Enclosures and housings
Trivoice 2.0 - Gravity-Safe Enclosure Revision
- Bounding box
- 200 × 115 × 36.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Revised two-part enclosure with breadboard snap retainers, overhanging PCB slide rails for SD reader, relay, MAX98357A and ESP32, preserved lid layout, speaker grille, buttons and INMP441 lid pocket/acoustic inlet. Dimensions of individual boards are provisional and must be checked against physical modules before printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 200 mm | 190 – 220 |
| Outer width | 115 mm | 95 – 120 |
| Base height | 31 mm | 27 – 40 |
| Wall thickness | 2.4 mm | 1.6 – 4 |
| Floor thickness | 2.4 mm | 1.6 – 4 |
| Corner radius | 6 mm | 3 – 10 |
| Breadboard length | 170 mm | 160 – 180 |
| Breadboard width | 60 mm | 55 – 70 |
| Lid screw boss diameter | 10 mm | 8 – 14 |
| M3 self-tapping screw pilot hole | 2.5 mm | 2.2 – 3 |
| Speaker long side | 50 mm | 45 – 60 |
| Speaker short side | 45 mm | 40 – 55 |
| M3 clearance hole | 3.4 mm | 3.2 – 4 |
| Panel-mount button hole | 12.2 mm | 8 – 16 |
| Horizontal opening width | 10.5 mm | 8 – 14 |
| Opening height | 4.5 mm | 3 – 7 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
