Brackets and mounts
Trivoice 2.0 Final Enclosure - Base and Lid
- Bounding box
- 200 × 105 × 31 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Final two-piece Trivoice 2.0 enclosure. Base holds the 170x60 breadboard with DFPlayer on the breadboard, separate side holders for SD reader, relay, MAX98357A and ESP32. Lid has speaker grille, circular M3 screw holes, four panel-mount button holes with reinforcement collars, and an INMP441 microphone module holder and acoustic inlet. ESP32 is on the right with horizontal USB-C opening on right wall; SD reader on left with pins facing away from ESP32.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 200 mm | 190 – 220 |
| Outer width | 105 mm | 95 – 120 |
| Base height | 31 mm | 27 – 40 |
| Wall thickness | 2.4 mm | 1.6 – 4 |
| Floor thickness | 2.4 mm | 1.6 – 4 |
| Corner radius | 6 mm | 3 – 10 |
| Breadboard length | 170 mm | 160 – 180 |
| Breadboard width | 60 mm | 55 – 70 |
| Lid screw boss diameter | 10 mm | 8 – 14 |
| M3 self-tapping screw pilot hole | 2.5 mm | 2.2 – 3 |
| Speaker long side | 50 mm | 45 – 60 |
| Speaker short side | 45 mm | 40 – 55 |
| M3 clearance hole | 3.4 mm | 3.2 – 4 |
| Panel-mount button hole | 12.2 mm | 8 – 16 |
| Horizontal opening width | 10.5 mm | 8 – 14 |
| Opening height | 4.5 mm | 3 – 7 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
