Brackets and mounts
Trivoice 2.0 Component Holder Enclosure
- Bounding box
- 200 × 105 × 32.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
200x105x31mm compact wider tray with integrated breadboard rails and retaining hooks for 170x60mm board, approximate ESP32/DFPlayer/relay/small-module cradles, four lid screw posts, and separate lid with four top-facing buttons and upward-facing external speaker mount.
Parameters
| Name | Value | Range |
|---|---|---|
| External length | 200 mm | 180 – 220 |
| External width | 105 mm | 95 – 120 |
| Base height | 31 mm | 27 – 40 |
| Wall thickness | 2.4 mm | 1.6 – 4 |
| Floor thickness | 2.4 mm | 1.6 – 4 |
| Corner radius | 6 mm | 3 – 10 |
| Breadboard length | 170 mm | 150 – 180 |
| Breadboard width | 60 mm | 50 – 70 |
| Breadboard clip height | 8 mm | 7 – 12 |
| Breadboard fit clearance | 0.5 mm | 0.2 – 1 |
| ESP32 cradle length | 58 mm | 50 – 65 |
| ESP32 cradle width | 30 mm | 25 – 35 |
| DFPlayer cradle length | 26 mm | 20 – 32 |
| DFPlayer cradle width | 24 mm | 18 – 30 |
| Relay cradle length | 52 mm | 40 – 60 |
| Relay cradle width | 29 mm | 22 – 35 |
| Small module tray length | 42 mm | 30 – 50 |
| Small module tray width | 29 mm | 20 – 35 |
| Lid thickness | 2.8 mm | 2 – 4 |
| Button hole diameter | 12.2 mm | 8 – 16 |
| Speaker mounting hole pattern | 40 mm | 30 – 50 |
| Speaker wire hole diameter | 6 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
