Enclosures and housings
Tripwire Container
- Bounding box
- 75.0 × 75.0 × 65.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
A cylindrical tripwire trap container for 3D printing. The outer body is a vertical cylinder with an outer diameter of 75mm, total height of 65mm, and wall thickness of 3mm. The top has a wide open hollow chamber inside to hold marking payload and a spring. Add internal screw threads at the top opening. Create a matching separate flat circular lid with external threads that screws securely into the top of the cylinder. On the side of the main cylinder, 15mm above the flat bottom base, add a horizontal 4mm circular through-hole passing through the wall for inserting a tripwire release pin. Ensure all walls and bottom are flat, solid, and optimized for clean FDM 3D printing without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 75 mm | 40 – 120 |
| Height | 65 mm | 30 – 100 |
| Wall Thickness | 3 mm | 1 – 6 |
| Hole Diameter | 4 mm | 2 – 10 |
| Hole Height From Base | 15 mm | 5 – 60 |
| Lid Thickness | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no