Brackets and mounts
Triangular Three-Point Mounting Bracket
- Bounding box
- 114 × 122 × 8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D mechanical mounting bracket based on the following design: The part consists of one large circular upper flange connected to two smaller circular mounting bosses at the bottom, forming a triangular three-point support structure. 1. Upper circular flange: - One large, flat cylindrical disc. - Six small circular holes arranged symmetrically around the center. - One larger central hole. 2. Lower mounting bosses: - Two cylindrical supports positioned symmetrically at the lower left and lower right. - Each support must have one circular through-hole in the center. 3. Connecting arms: - Three solid, flat connecting arms joining the upper flange to the two lower supports. - Maintain the triangular mechanical structure. - Arms must have consistent thickness. 4. 3D construction: - All parts must form one connected solid mechanical component. - Use cylindrical extrusions and circular through-holes. - Preserve the proportions of a technical engineering drawing. - Use millimeters. - Keep the surfaces clean and the geometry symmetrical. - Do not add screws, bolts, text, or decorative elements. Generate a fully editable parametric 3D CAD model, not a 2D drawing or a rendered image.
Parameters
| Name | Value | Range |
|---|---|---|
| Upper flange diameter | 80 mm | 40 – 200 |
| Central hole diameter | 24 mm | 6 – 60 |
| Small-hole bolt circle diameter | 56 mm | 20 – 150 |
| Small hole diameter | 6 mm | 2 – 12 |
| Number of small holes | 6 mm | 3 – 12 |
| Mounting boss diameter | 24 mm | 8 – 60 |
| Boss through-hole diameter | 8 mm | 2 – 30 |
| Distance between boss centres | 90 mm | 20 – 200 |
| Boss centres below flange centre | 70 mm | 10 – 200 |
| Plate thickness | 8 mm | 2 – 20 |
| Width of the connecting arms | 16 mm | 6 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
