Brackets and mounts
Triangular Three-Boss Mounting Bracket
- Bounding box
- 82 × 80 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a mechanical triangular mounting bracket with three cylindrical bosses at the vertices. The top main boss has an outer diameter, a central through-hole, and a circular pattern of smaller holes on a pitch circle diameter. The two bottom bosses are spaced symmetrically at an angle, each with an outer diameter and an inner through-hole. Connect the three bosses with a central plate of uniform thickness, bounded by outer radius curves. Add two structural ribs connecting the top boss to the bottom bosses.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 36 mm | 20 – 80 |
| Central through-hole | 14 mm | 6 – 40 |
| Bolt circle diameter | 26 mm | 16 – 60 |
| Bolt hole diameter | 4.5 mm | 2 – 10 |
| Number of bolt holes | 6 mm | 3 – 12 |
| Outer diameter | 24 mm | 16 – 60 |
| Through-hole | 9 mm | 4 – 30 |
| Distance between lower boss centres | 58 mm | 30 – 120 |
| Lower to top boss centre distance | 50 mm | 30 – 120 |
| Plate thickness | 6 mm | 3 – 16 |
| Boss height | 14 mm | 6 – 40 |
| Rib width at the plate | 5 mm | 2.5 – 12 |
| Rib width at the top | 3 mm | 1.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
