3D preview of Tray Holder with Mounting Flange
Loading the interactive model…
Interactive 3D model of Tray Holder with Mounting Flange

Brackets and mounts

Tray Holder with Mounting Flange

3 views
Bounding box
260.0 × 256.0 × 104.0 mm
Engine
Precision B-rep
Parameters
8
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Create an open-top, open-front U-shaped slide-in tray holder bracket with a flat rear mounting flange for double-sided tape attachment, sized for a 250 mm by 250 mm by 65 mm rectangular waste bin. Start with a flat bottom base plate 260 mm wide (X-axis), 256 mm deep (Y-axis), and 4 mm thick. Add three vertical walls 65 mm tall above the base plate (total tray height 69 mm) and 4 mm thick: a left wall (X = 0 to 4 mm), a right wall (X = 256 to 260 mm), and a back wall (Y = 252 to 256 mm), leaving the front (Y = 0) and the top completely open with no inward top lips or overhangs. Extend the flat outer back face (Y = 256 mm) upward by an additional 35 mm (from Z = 69 mm to Z = 104 mm, 4 mm thick, spanning the full 260 mm width) to form a large, completely flat rear mounting plate for double-sided adhesive tape. Keep all surfaces flat and clean without fillets or holes.

Parameters

NameValueRange
Inner Width (X)252 mm50 – 500
Inner Depth (Y)252 mm50 – 500
Inner Height (Z)65 mm10 – 300
Wall Thickness4 mm1 – 20
Base Thickness4 mm1 – 20
Flange Height35 mm0 – 200
Lip Width (Set to 0)0 mm0 – 50
Lip Thickness (Set to 0)0 mm0 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Tray Holder with Mounting Flange - Free CAD Model (STEP, STL) | TextoCAD