Mechanical parts
Tractor Front Suspension Control Arms
- Bounding box
- 508 × 150 × 255 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
attempt to make the bottom and top parts of a control arm for the front wheels of a tractor
Parameters
| Name | Value | Range |
|---|---|---|
| Pivot to ball joint length | 450 mm | 250 – 800 |
| Width across frame pivots | 150 mm | 80 – 300 |
| Pivot boss diameter | 60 mm | 40 – 90 |
| Pivot boss length | 44 mm | 20 – 80 |
| Pivot bushing bore | 25 mm | 10 – 50 |
| Leg diameter at ball joint | 32 mm | 16 – 60 |
| Cross brace diameter | 26 mm | 12 – 50 |
| Cross brace position from pivot | 126 mm | 40 – 350 |
| Ball joint socket diameter | 56 mm | 30 – 90 |
| Ball joint socket height | 58 mm | 30 – 100 |
| Ball joint socket bore | 30 mm | 10 – 60 |
| Pivot to ball joint length | 350 mm | 200 – 700 |
| Width across frame pivots | 120 mm | 70 – 260 |
| Pivot boss diameter | 50 mm | 34 – 80 |
| Pivot boss length | 38 mm | 18 – 70 |
| Pivot bushing bore | 20 mm | 10 – 45 |
| Leg diameter at ball joint | 28 mm | 14 – 55 |
| Cross brace diameter | 22 mm | 10 – 45 |
| Cross brace position from pivot | 98 mm | 30 – 250 |
| Ball joint socket diameter | 48 mm | 26 – 80 |
| Ball joint socket height | 50 mm | 26 – 90 |
| Ball joint socket bore | 24 mm | 10 – 50 |
| Lower pivot axis height above bed | 32 mm | 10 – 150 |
| Ball joint vertical separation | 200 mm | 80 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
