Brackets and mounts
TPU Cable Organizer - 5 C-Clips
- Bounding box
- 95 × 24 × 16.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
# SAXOLAYER CABLE 05 – TPU Cable Organizer Create a single-piece, 3D-printable cable organizer made entirely from flexible TPU. ## Design concept Use the exact same basic shape and design for all five cable clips, as shown in the reference image. The organizer consists of: - One continuous, flat rectangular baseplate. - Five C-shaped snap-fit cable clips integrated directly into the baseplate. - All five clips arranged in one straight horizontal row. - Every clip has the exact same shape and proportions, except for its internal diameter. - The entire product must be one connected solid body, not separate components. ## Clip geometry - Each clip is C-shaped, with a small opening at the top. - The opening must face vertically upward. - Cables must be pressed vertically down into the clips. - Two flexible retaining arms hold each cable in place. - The cable runs horizontally through the clip, parallel to the baseplate. - Each clip must have a rounded internal cable channel. - Use rounded edges and smooth transitions. - Do not create closed circular holes. - Do not create side-entry openings. - Do not create separate clip components. ## Clip sizes Arrange the clips from left to right: | Position | Internal diameter | |---|---:| | 1 | 10 mm | | 2 | 10 mm | | 3 | 12 mm | | 4 | 6.5 mm | | 5 | 6.5 mm | Only the internal diameter changes. The outer design, opening style and overall clip geometry should remain consistent. ## Baseplate - One continuous rectangular baseplate. - Approximate width: 90–100 mm, adjusted to fit all five clips. - Depth: 22–25 mm. - Thickness: 2.5–3 mm. - Completely flat underside for double-sided adhesive tape. - Clips must merge directly into the baseplate. ## 3D printing requirements - Material: TPU. - No supports required. - Designed for a 0.4 mm nozzle. - Target layer height: 0.2 mm. - Designed to print flat on the baseplate. - Avoid unnecessarily thin or fragile retaining arms. - Use rounded transitions to improve flexibility and durability. ## Important The reference image defines the overall shape and appearance. Reproduce that same design five times in one continuous row, changing only the internal cable diameters. The final model must be a single watertight, manifold solid suitable for STL export.
Parameters
| Name | Value | Range |
|---|---|---|
| Clip 1 inner diameter | 10 mm | 4 – 18 |
| Clip 2 inner diameter | 10 mm | 4 – 18 |
| Clip 3 inner diameter | 12 mm | 4 – 18 |
| Clip 4 inner diameter | 6.5 mm | 4 – 18 |
| Clip 5 inner diameter | 6.5 mm | 4 – 18 |
| Clip wall thickness | 2.4 mm | 1.2 – 4 |
| Half angle of the top opening | 40 deg | 25 – 55 |
| Clip length along the cable | 12 mm | 6 – 22 |
| Clip root sunk into the plate | 1.5 mm | 0.8 – 2.4 |
| Plate depth, cable direction | 24 mm | 16 – 40 |
| Plate thickness | 2.8 mm | 1.6 – 5 |
| Plate corner radius | 3 mm | 0 – 8 |
| Gap between neighbouring clips | 4 mm | 2 – 12 |
| Plate margin at both ends | 5 mm | 2 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o