Enclosures and housings
Toy Tank Assembly
- Bounding box
- 140.0 × 80.0 × 57.5 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
A simplified toy tank assembly consisting of four connected primitive shapes. The lower body is a rectangular block (length 120mm, width 70mm, height 20mm) representing the tracks and hull. Centered on top of this block is a smaller rectangular turret block (length 60mm, width 50mm, height 25mm). Extending forward from the front center face of the turret block is a cylindrical gun barrel (diameter 10mm, length 50mm). Four small cylinders (diameter 25mm, width 10mm) are attached horizontally to the bottom sides of the hull to represent wheels. All parts are combined into a single solid technical CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Hull Length | 120 mm | 60 – 240 |
| Hull Width | 70 mm | 40 – 160 |
| Hull Height | 20 mm | 8 – 60 |
| Turret Length | 60 mm | 20 – 120 |
| Turret Width | 50 mm | 20 – 120 |
| Turret Height | 25 mm | 8 – 80 |
| Barrel Diameter | 10 mm | 4 – 30 |
| Barrel Length (from turret face) | 50 mm | 10 – 120 |
| Wheel Diameter | 25 mm | 10 – 60 |
| Wheel Width | 10 mm | 4 – 30 |
| Wheel Centre Spacing | 72 mm | 30 – 90 |
| Wheel Axle Height (above hull base) | 0 mm | -10 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no