Jigs and fixtures
Tikka T3 Bore Guide with Side Openings
- Bounding box
- 22.0 × 22.0 × 210.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
The tube should have an open passage running longitudinally through the body. Reproduce the large oval side access opening visible in the photographs, positioned toward the rear portion of the guide. Reproduce the smaller opening/cutout visible near the opposite end. Reproduce the changes in external profile at both ends shown in the photographs. Use smooth transitions rather than sharp unnecessary edges. Keep the design lightweight and suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 210 mm | 150 – 300 |
| Body Outer Diameter | 17.2 mm | 12 – 25 |
| Rod Passage Diameter | 8 mm | 5 – 12 |
| Rear Collar OD | 22 mm | 18 – 30 |
| Rear Collar Length | 15 mm | 5 – 30 |
| Front Tip OD | 14 mm | 10 – 20 |
| Front Tip Length | 25 mm | 10 – 50 |
| O-Ring Groove Depth | 1.5 mm | 0.5 – 3 |
| O-Ring Groove Width | 3 mm | 1 – 6 |
| O-Ring Position from Front | 10 mm | 5 – 50 |
| End Chamfer Size | 0.5 mm | 0.1 – 2 |
| Rear Oval Opening Length | 40 mm | 20 – 80 |
| Rear Oval Opening Width | 10 mm | 5 – 15 |
| Rear Oval Center from Rear | 30 mm | 10 – 80 |
| Front Oval Opening Length | 20 mm | 10 – 40 |
| Front Oval Opening Width | 8 mm | 4 – 12 |
| Front Oval Center from Front | 60 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl