Brackets and mounts
Three-Stage Telescopic Drawer Slide
- Bounding box
- 180.0 × 20.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 3D CAD assembly of a simple three-stage telescopic drawer slide mechanism, compatible with SolidWorks. 1. Main Specifications * Fully closed overall length: exactly 180 mm. * Fully extended target length: approximately 300 mm. * Three-stage telescopic sliding mechanism. * Simple and realistic mechanical design. * All dimensions must be in millimeters. 2. Individual Components Create three separate and independently editable parts: A. Outer Rail: * Length: 180 mm. * U-shaped cross-section. * Width: 20 mm. * Height: 20 mm. * Wall thickness: 1.5 mm. B. Middle Rail: * Length: 180 mm. * U-shaped cross-section. * Width: 16 mm. * Height: 16 mm. * Wall thickness: 1.5 mm. C. Inner Rail: * Length: 180 mm. * U-shaped cross-section. * Width: 12 mm. * Height: 12 mm. * Wall thickness: 1.5 mm. 3. Assembly Requirements * Create a complete assembly containing all three separate components. * Do NOT combine the components into one part or one solid body. * Arrange the rails in a nested telescopic configuration. * Outer rail must hold the middle rail. * Middle rail must hold the inner rail. * Ensure sufficient clearance between moving components. * Add simple mounting holes. * Apply sliding mates or equivalent mechanical constraints. * The rails must be able to slide relative to each other. * Fully closed overall length must be exactly 180 mm. * Maximum extended target length must be approximately 300 mm. 4. Export Requirements Provide: 1. Complete assembly in STEP format with separate component identities. 2. Individual STEP files for Outer Rail, Middle Rail, and Inner Rail. 3. Native SolidWorks assembly (.SLDASM) and part files (.SLDPRT), if supported. 5. Important Instructions * Prioritize accurate dimensions and functional assembly. * Keep the geometry simple and easy to edit in SolidWorks. * Do not generate only a rendered image. * Do not generate a single combined solid. * Provide a 3D model that can be opened and inspected in SolidWorks.
Parameters
| Name | Value | Range |
|---|---|---|
| Rail Length | 180 mm | 100 – 400 |
| Wall Thickness | 1.5 mm | 0.8 – 4 |
| Outer Rail Width | 20 mm | 12 – 60 |
| Outer Rail Height | 20 mm | 10 – 60 |
| Outer Mounting Hole Dia | 4 mm | 2 – 8 |
| Middle Rail Width | 16 mm | 10 – 55 |
| Middle Rail Height | 16 mm | 8 – 55 |
| Middle Hole Dia | 3.5 mm | 1.5 – 8 |
| Inner Rail Width | 12 mm | 8 – 50 |
| Inner Rail Height | 12 mm | 6 – 50 |
| Inner Hole Dia | 3 mm | 1.5 – 8 |
| Sliding Clearance / Side | 0.5 mm | 0.1 – 2 |
| Hole Inset From End | 30 mm | 8 – 80 |
| Slide Extension (0 = closed) | 0 mm | 0 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
