Brackets and mounts
Three-Point Mounting Bracket
- Bounding box
- 122.4 × 122.8 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D mechanical part: a three-point mounting bracket/flange. The geometry consists of a large top circular hub with a central bore and a circular pattern of 8 small holes around it. From this top hub, two diagonal arms extend downwards, terminating in two lower circular eyelets (lugs). The part has varying thicknesses and stepped features. Please build the model using these exact parameters from row 14: - Top Hub Outer Diameter (D6): 62.64 - Central Bore Diameter (D4): 21.00 - Small Holes Pattern Diameter (D5): 39.90 - Small Holes Diameter (D3): 7.57 - Number of Small Holes (N): 8 - Arm Angle (A1): 29.00 degrees - Outer Arm Radius (R4): 126.00 - Inner Arm Radius (R3): 50.39 - Lower Eyelet Outer Diameter (D2): 38.18 - Lower Eyelet Bore Diameter (D1): 19.09 - Arm Length/Distance (L1): 5.00 - Main Body Curve Radius (R2): 138.60 - Total Base Thickness/Height (E1): 16.00 - Top Hub Thickness (E2): 22.00 - Arm Thickness (E3): 16.00 - Lower Eyelet Total Height (E4): 18.00 - Eyelet Step/Shoulder Height (E5): 16.00 - Top Step Thickness (E6): 6.00 - Bottom Step Thickness (E7): 7.00 - Fillet Radius (R1): 5.00 Please generate the solid model using these exact dimensions. Maintain the same overall shape, proportions, arrangement of the holes, diagonal arms, lower eyelets, stepped features, and mechanical design shown in the attached reference image. Do not change, approximate, or modify any of the specified dimensions. Pay special attention to the number of small holes (8) and the thickness measurements. The final result should be a clean, accurate 3D solid mechanical part suitable for CAD modeling.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Hub OD | 62.64 mm | 20 – 200 |
| Central Bore Dia | 21 mm | 2 – 100 |
| Small Hole Pattern Dia | 39.9 mm | 10 – 150 |
| Small Hole Dia | 7.57 mm | 1 – 30 |
| Small Hole Count | 8 pcs | 2 – 24 |
| Arm Angle | 29 deg | 5 – 80 |
| Outer Arm Radius | 126 mm | 20 – 300 |
| Inner Arm Radius | 50.39 mm | 10 – 250 |
| Lower Eyelet OD | 38.18 mm | 10 – 120 |
| Lower Eyelet Bore Dia | 19.09 mm | 2 – 80 |
| Arm Length / Distance | 5 mm | 0.5 – 30 |
| Main Body Curve Radius | 138.6 mm | 20 – 400 |
| Base Thickness / Height | 16 mm | 2 – 60 |
| Top Hub Thickness | 22 mm | 3 – 80 |
| Arm Thickness | 16 mm | 2 – 60 |
| Lower Eyelet Total Height | 18 mm | 2 – 60 |
| Eyelet Shoulder Height | 16 mm | 1 – 60 |
| Top Step Thickness | 6 mm | 0.5 – 30 |
| Bottom Step Thickness | 7 mm | 0.5 – 30 |
| Fillet Radius | 5 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
