3D preview of Three-Point Mounting Bracket
Loading the interactive model…
Interactive 3D model of Three-Point Mounting Bracket

Brackets and mounts

Three-Point Mounting Bracket

1 views
Bounding box
153.2 × 164.1 × 25.0 mm
Engine
Precision B-rep
Parameters
20
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Generate a 3D mechanical part: a three-point mounting bracket/flange. The geometry consists of a large top circular hub with a central bore and a circular pattern of 5 small holes around it. From this top hub, two diagonal arms extend downwards, terminating in two lower circular eyelets (lugs). The part has varying thicknesses and stepped features. Please build the model using these exact parameters from row 15: Top Hub Outer Diameter (D6): 86.51 Central Bore Diameter (D4): 29.00 Small Holes Pattern Diameter (D5): 55.10 Small Holes Diameter (D3): 10.46 Number of Small Holes (N): 7 Arm Angle (A1): 28.00 degrees Outer Arm Radius (R4): 107.00 Inner Arm Radius (R3): 28.64 Lower Eyelet Outer Diameter (D2): 52.73 Lower Eyelet Bore Diameter (D1): 26.36 Arm Length/Distance (L1): 15.00 Main Body Curve Radius (R2): 117.70 Total Base Thickness/Height (E1): 11.00 Top Hub Thickness (E2): 22.00 Arm Thickness (E3): 17.00 Lower Eyelet Total Height (E4): 25.00 Eyelet Step/Shoulder Height (E5): 17.00 Top Step Thickness (E6): 6.00 Bottom Step Thickness (E7): 6.00 Fillet Radius (R1): 10.00 Please generate the solid model using these exact dimensions. Maintain the same overall shape, proportions, arrangement of the holes, diagonal arms, lower eyelets, stepped features, and mechanical design shown in the attached reference image. Do not change or approximate the specified dimensions. The final result should be a clean, accurate 3D solid mechanical part suitable for CAD modeling.

Parameters

NameValueRange
Top Hub OD (D6)86.51 mm50 – 140
Central Bore Dia (D4)29 mm8 – 60
Small Hole Pattern Dia (D5)55.1 mm20 – 120
Small Hole Dia (D3)10.46 mm2 – 25
Number of Small Holes (N)7 count3 – 16
Arm Angle (A1)28 deg5 – 60
Outer Arm Radius / Eyelet Pitch (R4)107 mm50 – 200
Inner Arm Radius (R3)28.64 mm8 – 80
Arm Length / Width (L1)15 mm4 – 45
Main Body Curve Radius (R2)117.7 mm60 – 220
Lower Eyelet OD (D2)52.73 mm25 – 100
Lower Eyelet Bore Dia (D1)26.36 mm6 – 60
Lower Eyelet Total Height (E4)25 mm8 – 60
Eyelet Step/Shoulder Height (E5)17 mm4 – 55
Total Base Thickness / Height (E1)11 mm3 – 35
Top Hub Thickness (E2)22 mm6 – 60
Arm Thickness (E3)17 mm4 – 50
Top Step Thickness (E6)6 mm1 – 20
Bottom Step Thickness (E7)6 mm1 – 20
Fillet Radius (R1)10 mm0.5 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.