Enclosures and housings
Three-lug support spider
- Bounding box
- 210.8 × 235.8 × 14.1 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Genera la pieza mecánica en 3D utilizando las dos imágenes proporcionadas como referencia y exclusivamente las medidas de la fila 20 de la tabla. Necesito obtener DOS RESULTADOS: 1. *MODELO 3D EDITABLE:* Construye la pieza completa en tres dimensiones, respetando la geometría del plano, los tres soportes circulares, sus perforaciones, el disco central con sus 8 agujeros y los brazos de unión. Entrega el archivo en formato STEP y también en formato nativo editable del programa CAD. 2. *MODELO PARA IMPRESIÓN 3D:* Genera el mismo modelo, preparado para impresión 3D, en formato STL, con geometría cerrada, sólida y sin errores de malla. *MEDIDAS EN MILÍMETROS:* D1=24.55 D2=49.09 D3=9.73 D4=27.00 D5=51.30 D6=80.54 A1=28.00 R1=4.00 R2=107.80 R3=25.76 R4=98.00 L1=14.00 E1=13.00 E2=25.00 E3=17.00 E4=19.00 E5=20.00 N=8 E6=7.00 E7=7.00 Respeta exactamente las dimensiones y la distribución geométrica del plano original. No cambies las proporciones ni inventes medidas. Presenta también las vistas isométrica, frontal, superior y lateral. Comprueba que ambos modelos correspondan a la misma pieza y que todas las perforaciones estén correctamente realizadas. Entrega los archivos descargables STEP, STL y el archivo CAD editable.
Parameters
| Name | Value | Range |
|---|---|---|
| D1 support hole dia | 24.55 mm | 5 – 40 |
| D2 support boss dia | 49.09 mm | 20 – 80 |
| D3 center hole dia | 9.73 mm | 2 – 20 |
| D4 center bore dia | 27 mm | 5 – 50 |
| D5 center recess dia | 51.3 mm | 10 – 90 |
| D6 center disk dia | 80.54 mm | 30 – 140 |
| A1 support counterbore dia | 28 mm | 10 – 50 |
| R1 bore chamfer | 4 mm | 0.5 – 10 |
| R2 support center radius | 107.8 mm | 50 – 180 |
| R3 center hole circle radius | 25.76 mm | 10 – 60 |
| R4 arm shoulder radius | 98 mm | 30 – 170 |
| L1 thickness | 14 mm | 3 – 30 |
| E1 arm tip width | 13 mm | 3 – 30 |
| E2 arm mid width | 25 mm | 5 – 50 |
| E3 arm mid offset | 17 mm | 2 – 40 |
| E4 arm root width | 19 mm | 5 – 40 |
| E5 arm shoulder width | 20 mm | 5 – 40 |
| E6 counterbore depth | 7 mm | 0.5 – 15 |
| E7 arm root overlap | 7 mm | 0.5 – 20 |
| N center hole count | 8 holes | 3 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
