Brackets and mounts
Three-Hub Mechanical Bracket
- Bounding box
- 185.2 × 157.6 × 35.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a mechanical bracket on the XY plane in millimeters. Main Hub: Create a central cylinder at the origin (0, 0, 0) with an outer diameter of 68.6 mm and a total height of 34.0 mm. Main Center Hole: Cut a central through-hole in the main cylinder with a diameter of 23.0 mm. Bolt Pattern: Cut a circular pattern of 6 through-holes, each with a diameter of 8.3 mm, evenly spaced along a pitch circle diameter of 43.7 mm centered at the origin. Left Lower Hub: Create a cylinder centered at X = -71.7 mm, Y = -102.4 mm, Z = 0 with an outer diameter of 41.8 mm and a total height of 36.0 mm. Cut a through-hole in its center with a diameter of 20.9 mm. Right Lower Hub: Create a cylinder centered at X = 71.7 mm, Y = -102.4 mm, Z = 0 with an outer diameter of 41.8 mm and a total height of 36.0 mm. Cut a through-hole in its center with a diameter of 20.9 mm. Connecting Web: Create a solid connecting plate with a thickness of 11.0 mm that spans between the main hub and the two lower hubs. The outer edges of this plate should tangentially blend into the outer perimeters of the three cylinders. Add structural ribs connecting the top of the main cylinder to the top of the lower cylinders with a width of 10.0 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Main hub outer diameter | 68.6 mm | 20 – 150 |
| Main hub height | 34 mm | 5 – 80 |
| Main hub center bore | 23 mm | 3 – 60 |
| Number of bolt holes | 6 mm | 3 – 12 |
| Bolt pitch circle diameter | 43.7 mm | 10 – 120 |
| Bolt hole diameter | 8.3 mm | 2 – 20 |
| Lower hub X offset | 71.7 mm | 10 – 250 |
| Lower hub Y offset | -102.4 mm | -250 – -10 |
| Lower hub outer diameter | 41.8 mm | 10 – 120 |
| Lower hub height | 36 mm | 5 – 80 |
| Lower hub bore diameter | 20.9 mm | 3 – 60 |
| Connecting web thickness | 11 mm | 2 – 40 |
| Rib width | 10 mm | 2 – 40 |
| Hub top chamfer | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
