243.7253.8217.1
Loading the interactive model…
Interactive 3D model of Three-Eared Robot Arm Base Pedestal

Brackets and mounts

Three-Eared Robot Arm Base Pedestal

1 views
Bounding box
253.8 × 243.7 × 217.1 mm
Engine
Precision B-rep
Parameters
11
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Prompt: Create a robotic arm base pedestal in millimeters. Start with a flat hexagonal/three-eared base plate centered at the origin, 271.5 mm wide across the flat-to-point span and 28 mm thick, with three symmetrical mounting ears spaced 120 degrees apart. Drill two 15 mm diameter through-holes into each of the three mounting ears (6 holes total) near the outer edges. Extrude a hollow vertical cylindrical column upward from the center of the base plate to a total part height of 217 mm, with an outer diameter of 208 mm and an inner bore diameter of 180 mm. Add a 5 mm fillet where the vertical cylinder meets the top face of the base plate.

Parameters

NameValueRange
Point-to-Point Span271.5 mm180 – 400
Plate Thickness28 mm10 – 60
Central Disc Diameter236 mm160 – 340
Mounting Ear Radius32 mm20 – 50
Ear Hole Diameter15 mm6 – 24
Hole Radial Offset16 mm8 – 26
Hole Pair Spacing24 mm15 – 50
Column Outer Diameter208 mm100 – 300
Column Bore Diameter180 mm60 – 280
Total Part Height217 mm80 – 450
Column Base Fillet5 mm1 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Three-Eared Robot Arm Base Pedestal - Free CAD Model (STEP, STL) | TextoCAD