Enclosures and housings
Threaded Disk - M10x1.5 Blind Hole
- Bounding box
- 101.6 × 101.6 × 33.3 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Modify existing model build-28a5105a9c5d. Preserve the 101.6 mm outer diameter, 33.3 mm height, M10x1.5 helical internal thread and hole position 31.8 mm from cylinder center (14 mm nominal edge distance). IMPORTANT change: the threaded blind hole must be 25 mm deep measured from the top face, not through the full 33.3 mm height. The pilot bore and the helical internal thread both stop at 25 mm depth, leaving 8.3 mm solid material at the bottom. Keep all other dimensions unchanged. Export STL and STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 101.6 mm | 20 – 300 |
| Height | 33.3 mm | 10 – 200 |
| Thread Nominal Diameter | 10 mm | 3 – 60 |
| Thread Pitch | 1.5 mm | 0.35 – 6 |
| Threaded Hole Depth (from top face) | 25 mm | 3 – 190 |
| Thread Half-Flank Angle | 30 deg | 10 – 45 |
| Print / Fit Clearance on Radius | 0.15 mm | 0 – 0.6 |
| Hole Centre Offset from Disk Axis | 31.8 mm | 0 – 140 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no