Brackets and mounts
Third-Place Tennis Trophy - Two-Part Threaded ABS Body
- Bounding box
- 202.0 × 84.0 × 85.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a third-place tennis trophy based on the reference design. **1. Upper Ball Holder – Keep Unchanged** - Exactly the same design as the first-place and second-place trophies. - Side width: 30 mm. - Inner diameter: Ø67 mm. - Top opening: 68 mm. - Holds one tennis ball, Ø65–68 mm. - Material: ABS plastic. **2. Lower Cylinder** - Outer diameter: Ø80 mm. - Internal diameter: Ø70 mm. - Cylinder height: approximately 85 mm. - Hollow inside, with no tennis ball storage requirement. - No front viewing window. - No removable bottom cap. - Bottom must be permanently closed and integrated with the cylinder. **3. Threaded Connection** - Use exactly the same external thread and locating shoulder as the first-place and second-place trophies. - External thread must be outside the Ø70 mm internal passage. - Keep the internal passage smooth and unobstructed. - Ensure the upper holder and lower cylinder fit securely. **4. General Requirements** - All parts made of ABS plastic. - Black matte finish. - Upper holder and lower cylinder must be separate parts. - Create editable 3D CAD geometry. - Export as STEP (.stp) file.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 120 mm | 100 – 300 |
| Lower Cylinder Outer Diameter | 80 mm | 80 – 120 |
| Lower Cylinder Inner Diameter | 70 mm | 40 – 70 |
| Lower Cylinder Height | 85 mm | 50 – 200 |
| Integrated Bottom Thickness | 5 mm | 2 – 15 |
| Thread Root / Minor Diameter | 73 mm | 72 – 75 |
| Thread Crest / Major Diameter | 76 mm | 76 – 77.5 |
| Thread Pitch | 2 mm | 1.5 – 4 |
| Thread Engagement Length | 12 mm | 8 – 20 |
| Thread Radial / Axial Clearance | 0.2 mm | 0.05 – 0.5 |
| Thread Ridge Axial Height | 0.8 mm | 0.4 – 0.9 |
| Upper Holder Outer Diameter | 80 mm | 80 – 100 |
| Upper Holder Side Height | 30 mm | 28 – 80 |
| Ball Cavity Inner Diameter | 67 mm | 50 – 72 |
| Top Opening Diameter | 68 mm | 60 – 74 |
| Ball Cavity Depth | 24 mm | 10 – 25 |
| Top Opening Lead-in Depth | 2 mm | 1 – 5 |
| Locating Shoulder Diameter | 84 mm | 82 – 120 |
| Locating Shoulder Height | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl