Enclosures and housings
Thermometer Scanner Enclosure
- Bounding box
- 110.0 × 152.0 × 52.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable industrial handheld thermometer scanner enclosure. The design features a horizontal upper barrel (length 110mm) and a vertical drop-down ergonomic handle grip (height 100mm). Wall thickness is 2.5mm throughout. The front tip of the horizontal barrel has an open mesh air intake grille leading to a 39.2mm circular internal chamber. Behind this chamber is a 20mm hollow gap, followed by a 41mm x 41mm square cavity for a 40mm blower fan. Cut angled exhaust vents into the left and right sides of the barrel behind the fan cavity. The vertical handle contains a top cavity measuring 41.5mm x 46.5mm x 14mm with four corner M2 standoffs, and a lower battery compartment measuring 21mm x 76mm x 21mm. The front of the handle includes a 12mm circular hole for a trigger button. The angled rear back-panel of the top barrel includes two 5.2mm circular holes for LEDs and a 10mm x 5mm rectangular cutout for a switch.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel Length | 110 mm | 80 – 150 |
| Barrel Width (Y) | 52 mm | 40 – 70 |
| Barrel Height (Z) | 52 mm | 40 – 70 |
| Wall Thickness | 2.5 mm | 1 – 5 |
| Front Chamber Diameter | 39.2 mm | 30 – 50 |
| Front Chamber Length | 30 mm | 20 – 60 |
| Hollow Gap Length | 20 mm | 10 – 40 |
| Fan Cavity Width (Square) | 41 mm | 30 – 60 |
| Fan Cavity Length (X) | 41 mm | 20 – 60 |
| Handle Height | 100 mm | 70 – 150 |
| Handle X Start | 10 mm | 0 – 50 |
| Top Cavity Width (X) | 41.5 mm | 30 – 60 |
| Top Cavity Depth (Z) | 46.5 mm | 30 – 60 |
| Top Cavity Height (Y) | 14 mm | 10 – 30 |
| Battery Comp Width (X) | 21 mm | 15 – 40 |
| Battery Comp Height (Y) | 76 mm | 50 – 120 |
| Battery Comp Depth (Z) | 21 mm | 15 – 40 |
| Trigger Hole Diameter | 12 mm | 8 – 20 |
| LED Hole Diameter | 5.2 mm | 3 – 8 |
| Switch Cutout Width (Z) | 10 mm | 5 – 20 |
| Switch Cutout Height (Y) | 5 mm | 3 – 15 |
| Exhaust Vent Count per Side | 4 | 2 – 8 |
| Exhaust Vent Length | 10 mm | 5 – 20 |
| Exhaust Vent Width | 2 mm | 1 – 4 |
| Exhaust Vent Angle (deg) | 45 deg | 0 – 80 |
| Standoff Outer Diameter | 3.5 mm | 2 – 6 |
| Standoff Hole Diameter | 2 mm | 1.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox