Everything else
TF-bricka – logga och Biltema-skruvfäste
- Bounding box
- 250 × 145.8 × 91 mm
- Engine
- 3D Printing B-rep
- Parameters
- 0
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Upphöjd TF-logga på brickans ovansida,0,8mm över ytan. Vänster och höger försänkt4,5mm skruvhål, exakt samma höjd75mm och216mm centrumavstånd=18x12mm enligt angivet Biltema-rutnät.2,4mm fästtjocklek för cirka5mm skruvar. Understöd och väggar slutar i brickans bakkantsplan, inga bakre utsprång.
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Hexapod Robot with Stewart Platform
parallel platforms hexapod , stewart gough platform
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn