Enclosures and housings
Tensegrity Ceiling Support
- Bounding box
- 284 × 301.6 × 2099 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed 3D CAD model of a fully extended vertical tensegrity emergency ceiling support structure. IMPORTANT: Only create the fully deployed and extended configuration. Do not create a folded version. Overall dimensions: - Total height: 2100 mm - Top circular plate diameter: 200 mm - Bottom circular plate diameter: 200 mm - Tall, narrow vertical structure. STRUCTURAL COMPONENTS: 1. Top plate: A circular horizontal metal plate at the top, designed to press against and support a ceiling. Add a thin rubber contact pad underneath. 2. Bottom plate: A circular horizontal metal base plate resting on the floor. 3. Compression members: Use three long rigid cylindrical metal rods arranged in a tensegrity configuration. The rods must cross diagonally between the upper and lower connection levels, forming multiple visible X-shaped patterns. Use orange color for these rods. 4. Tension cables: Use three thin steel cables arranged diagonally between alternating upper and lower connection points. The cables must cross in opposite directions and stabilize the structure. Use blue color for these cables. 5. Central tightening assembly: Add a central vertical tightening cable and a visible tightening connection around the middle section. Use teal color for the central tension element. 6. Connection joints: Add visible mechanical joints, cable eyelets and pins at the rod and cable connection points. VISUAL REQUIREMENTS: - Show the entire structure in its fully extended vertical position. - The structure should look approximately 2.1 meters tall and slender. - Clearly show the crossed orange compression rods and blue diagonal tension cables. - Keep the top and bottom plates horizontal and parallel. - Use a clean engineering CAD appearance. - Show the complete assembly from an isometric 3D perspective. - Keep every component as a separate identifiable solid. Do not create a tripod, hydraulic jack, scissor lift, telescopic column or conventional support stand.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall height | 2100 mm | 1200 – 2600 |
| Plate diameter | 200 mm | 100 – 320 |
| Top plate thickness | 10 mm | 5 – 30 |
| Bottom plate thickness | 12 mm | 5 – 30 |
| Rubber contact pad diameter | 180 mm | 60 – 300 |
| Rubber contact pad thickness | 3 mm | 1 – 10 |
| Compression rod diameter | 20 mm | 8 – 40 |
| Tension cable diameter | 4 mm | 2 – 10 |
| Attachment radius | 76 mm | 40 – 110 |
| Joint pin diameter | 6 mm | 3 – 12 |
| Clevis slot width | 12 mm | 8 – 20 |
| Central tension cable diameter | 5 mm | 2 – 12 |
| Turnbuckle body diameter | 30 mm | 14 – 60 |
| Turnbuckle body length | 120 mm | 40 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,