Enclosures and housings
Temple Front Assembly
- Bounding box
- 9040.0 × 3990.0 × 4360.1 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a dimensionally exact architectural CAD test assembly in meters. Do not design or infer architecture. Do not add any geometry not explicitly specified below. Coordinate system: X = horizontal facade direction. Y = building depth. Z = vertical. Create exactly four separate vertical supports on the front line Y = 0. Support 1: rectangular pier. Center X = -4.27 m. Width X = 0.50 m. Depth Y = 0.80 m. Height Z = 4.36 m. Support 2: circular column. Center X = -1.73 m. Center Y = 0. Diameter = 0.46 m. Height = 3.90 m. Support 3: circular column. Center X = +1.73 m. Center Y = 0. Diameter = 0.46 m. Height = 3.90 m. Support 4: rectangular pier. Center X = +4.27 m. Width X = 0.50 m. Depth Y = 0.80 m. Height Z = 4.36 m. Create a rectangular cella front wall behind the supports. Cella front wall position: Y = 2.99 m. Cella front wall total width: 7.22 m. Wall thickness: 0.60 m. Create one centered rectangular doorway through this wall. Door clear width: 3.00 m. Door clear height: 3.90 m. Keep every support and wall as a separate editable parametric feature. Required parameters: facade_width = 9.04 m pronaos_depth = 2.99 m outer_pier_width = 0.50 m outer_pier_depth = 0.80 m inner_column_diameter = 0.46 m cella_width = 7.22 m cella_wall_thickness = 0.60 m door_width = 3.00 m door_height = 3.90 m CRITICAL VALIDATION: Front supports must remain: RECTANGLE – CIRCLE – CIRCLE – RECTANGLE. The cella wall must be exactly 2.99 m behind the front support line. Do not create: roof, pediment, arch, stairs, bases, capitals, entablature, ornament, statues, additional walls, ground, street, textures. Stop after creating only this geometric test assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Left Pier Center X (mm) | -4270 mm | -5000 – -3000 |
| Right Pier Center X (mm) | 4270 mm | 3000 – 5000 |
| Left Column Center X (mm) | -1730 mm | -2500 – -1000 |
| Right Column Center X (mm) | 1730 mm | 1000 – 2500 |
| Outer Pier Width X (mm) | 500 mm | 200 – 1000 |
| Outer Pier Depth Y (mm) | 800 mm | 400 – 1500 |
| Inner Column Diameter (mm) | 460 mm | 200 – 1000 |
| Pier Height Z (mm) | 4360 mm | 2000 – 8000 |
| Column Height Z (mm) | 3900 mm | 2000 – 8000 |
| Pronaos Depth Y (mm) | 2990 mm | 1000 – 5000 |
| Cella Wall Width X (mm) | 7220 mm | 4000 – 10000 |
| Cella Wall Thickness Y (mm) | 600 mm | 200 – 1000 |
| Door Clear Width (mm) | 3000 mm | 1000 – 5000 |
| Door Clear Height (mm) | 3900 mm | 1000 – 6000 |
| Cella Wall Height Z (mm) | 4360 mm | 2000 – 8000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox