Enclosures and housings
Telescoping Garage (3 Stages)
- Bounding box
- 5920.0 × 2000.0 × 4920.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D parametric CAD model for a 3-stage telescoping retractable garage structure made of rectangular aluminum tubes (80mm x 80mm). The total structure forms an "L-shape" combining a roof panel and a side wall panel for each stage. Stage 1 (Fixed Anchor): - Roof dimensions: 3.00m length x 2.00m width. - Side wall dimensions: 3.00m height x 2.00m width. - Fully fixed to the wall and floor. Stage 2 (Middle Sliding Module): - Must fit concentrically inside Stage 1 with clear tolerances. - Roof dimensions: 2.90m length x 1.98m width. - Side wall dimensions: 2.95m height x 1.98m width. Stage 3 (Smallest Sliding Module): - Must fit concentrically inside Stage 2 with clear tolerances. - Roof dimensions: 2.80m length x 1.96m width. - Side wall dimensions: 2.90m height x 1.96m width. Structural Details: - Each of the 6 panels features a central vertical reinforcement tube dividing the 2-meter width into two 1-meter sections. - At the bottom base of Stage 2 and Stage 3 side walls, include a rectangular cutout slot for embedded U-groove wheels. - Output the geometry as a clean, parametric assembly model suitable for engineering review.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube size | 80 mm | 40 – 120 |
| Roof length (fixed) | 3000 mm | 2000 – 5000 |
| Roof width | 2000 mm | 1000 – 4000 |
| Wall height | 3000 mm | 2000 – 4000 |
| Wall width | 2000 mm | 1000 – 4000 |
| Roof length (mid) | 2900 mm | 1000 – 4900 |
| Roof width | 1980 mm | 1000 – 3980 |
| Wall height | 2950 mm | 1000 – 3950 |
| Wall width | 1980 mm | 1000 – 3980 |
| Roof length (min) | 2800 mm | 1000 – 4800 |
| Roof width | 1960 mm | 1000 – 3960 |
| Wall height | 2900 mm | 1000 – 3900 |
| Wall width | 1960 mm | 1000 – 3960 |
| Wheel slot width | 80 mm | 40 – 120 |
| Wheel slot height | 100 mm | 60 – 150 |
| Vertical gap | 5 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox