Fittings and adapters
Technics EAH-A1000 USB Charging Headphone Stand
- Bounding box
- 110 × 78.4 × 259 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
le dessus est nul il faut que ça soit adapté a un arceau il faut aussi que au milieu de la tige il y ait un system reglable qui permete de faire que l'enbout usb puisse s'adapter au different casque. Pour la baase les emplacement que tu as fait ressemble pas a ce qu'il faut pour de l'usb c
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 110 mm | 80 – 180 |
| Base depth | 76 mm | 60 – 140 |
| Base height | 24 mm | 14 – 40 |
| Post height above base | 235 mm | 150 – 300 |
| Post width | 44 mm | 30 – 70 |
| Post depth | 30 mm | 20 – 60 |
| Saddle length front-to-back | 60 mm | 40 – 120 |
| Saddle width side-to-side | 72 mm | 40 – 120 |
| Saddle block height | 34 mm | 16 – 60 |
| Headband arch radius | 95 mm | 60 – 200 |
| Outer sleeve height above base | 120 mm | 70 – 200 |
| Slider insertion depth | 40 mm | 20 – 80 |
| Sleeve wall thickness | 4 mm | 2 – 8 |
| Adjust hole pitch | 10 mm | 6 – 20 |
| Number of adjust holes | 4 mm | 2 – 8 |
| Bay opening width | 26 mm | 18 – 40 |
| Bay opening height | 14 mm | 8 – 22 |
| Bay centre spacing | 56 mm | 40 – 90 |
| Bay bottom above the bed | 4 mm | 2 – 10 |
| Cartridge body length | 28 mm | 16 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
Laminar Jet Hose Nozzle
I need a 3d printable hose lock compatible water nozzle which produces a laminar jet
