Enclosures and housings
Tapered Reservoir with R1 Shaft Supports
- Bounding box
- 120.0 × 31.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model only. Keep the reservoir and Roller R1 unchanged. Add two identical internal supports for the R1 shaft, one on each internal side wall. R1 axis: - Y = 10.14 mm - Z = 14 mm - parallel to X Each support: - integrated with the reservoir side wall - projection inward along X = 3 mm - U-shaped shaft seat open upward - shaft seat diameter = 3.4 mm - shaft seat centered on the R1 axis - minimum support thickness around the seat = 2.5 mm The left support must extend inward from the left internal wall. The right support must extend inward from the right internal wall. Keep at least 1 mm axial clearance between each support and the corresponding end of Roller R1. Do not create holes through the reservoir walls. Do not merge Roller R1 with the supports. Roller R1 must remain a separate removable solid body. Do not modify the reservoir dimensions, taper, wall thickness, bottom or existing slots. Do not add the shaft, second roller, motor, cover, drain or other features.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width X | 120 mm | 60 – 300 |
| Overall Height Z | 80 mm | 40 – 200 |
| Depth at Bottom | 12 mm | 5 – 80 |
| Depth at Z-Mid | 31 mm | 5 – 100 |
| Z of Mid Taper Point | 30 mm | 10 – 150 |
| Depth at Top | 27 mm | 5 – 100 |
| Wall Thickness | 3 mm | 1.5 – 10 |
| Bottom Thickness | 3 mm | 1.5 – 12 |
| Slot Width X | 40 mm | 5 – 110 |
| Slot Height Z | 10 mm | 2 – 30 |
| Lower Slot Centre Z | 42 mm | 5 – 190 |
| Upper Slot Centre Z | 58 mm | 5 – 190 |
| R1 Roller Diameter | 8 mm | 3 – 40 |
| R1 Roller Length | 106 mm | 20 – 250 |
| R1 Axial Bore | 3.4 mm | 0 – 20 |
| R1 Axis Height Z | 14 mm | 5 – 150 |
| R1 Centre X | 60 mm | 0 – 300 |
| Support Projection Inward | 3 mm | 1 – 20 |
| Seat Diameter | 3.4 mm | 1 – 20 |
| Material Around Seat | 2.5 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no