3D preview of Tapered Mounting Flange Body
Loading the interactive model…
Interactive 3D model of Tapered Mounting Flange Body

Brackets and mounts

Tapered Mounting Flange Body

1 views
Bounding box
124 × 44 × 140 mm
Engine
3D Printing B-rep
Parameters
11
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precise, fully editable 3D mechanical CAD model based on the attached technical drawing. IMPORTANT: Reproduce the geometry shown in the reference image. Do not redesign the object or simplify its characteristic shape. **UNITS AND DIMENSIONS** - Use millimeters (mm) for all measurements. - Overall height: 140 mm. - Mounting hole diameter: Ø15 mm. - Distance between the two mounting hole centers: 80 mm. - Mounting flange thickness: 12 mm. - Tapered body length: 50 mm. - Reproduce all other dimensions according to the proportions and dimension markings in the reference drawing. **1. MOUNTING FLANGE** Create a flat, elongated oval-shaped mounting flange with two rounded ends. - The flange must have two circular through-holes, one at each end. - Both holes must have a diameter of 15 mm. - The distance between their centers must be exactly 80 mm. - The external contour must have smooth rounded transitions, following the technical drawing. - Add the central circular raised boss visible in the top view. **2. CENTRAL TAPERED BODY** From the center of the underside of the mounting flange, create a downward-projecting tapered body. - The body must be aligned with the central axis of the flange. - It must have a wide section close to the flange. - Gradually reduce its diameter toward the lower end. - The tapered section must be approximately 50 mm long. - Maintain the angular and proportional appearance

Parameters

NameValueRange
Overall height140 mm60 – 240
Mounting flange thickness12 mm6 – 30
Mounting hole diameter15 mm6 – 30
Distance between hole centres80 mm40 – 160
Flange end radius22 mm14 – 45
Tapered body length50 mm20 – 120
Taper diameter at the flange44 mm20 – 70
Taper diameter at the lower end26 mm10 – 60
Raised central boss diameter40 mm20 – 70
Raised central boss height8 mm2 – 25
Central through bore18 mm0 – 50

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.