Brackets and mounts
Tactical Two-Story Robotic Chassis
- Bounding box
- 200 × 163.5 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 37
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Prompt: Design a tactical, industrial, 3D-printable two-story robotic chassis superstructure engineered to bolt directly onto a metal tracked tank base. Matte black engineering plastic aesthetic (PETG/ABS), rugged military-robotics style with sharp 45-degree chamfered edges, flat geometric surfaces, and 4mm thick walls suitable for FDM 3D printing. Bottom Mounting Interface (Underneath First Floor): Four solid cylindrical mounting legs (risers) protruding straight downward by 15mm from the bottom underside of the first floor. Position these four downward legs symmetrically at X = ±30mm (60mm apart) and Y = ±45mm (90mm apart) from the center. Each leg has a 10mm outer diameter and a 3.2mm vertical through-hole for M3 bolts. These 15mm downward legs elevate the entire flat bottom plate cleanly above the 8mm-tall tank tracks, leaving 7mm of clearance. First Floor (Bottom Electronics Deck): A completely flat, rectangular horizontal plate measuring 200mm in width (X-axis), 140mm in length (Y-axis), and 4mm thick. STRICT CONSTRAINT: Keep the left and right outer edges completely flat and rectangular—NO curved fenders, NO arched hoods, and NO rounded side covers, so electronics can be mounted across the full 200mm flat top surface. Include a central 25mm circular cable pass-through hole near the rear (X = 0mm, Y = -45mm) and elongated rectangular cable-routing slots. Along the front edge (Y = +70mm), add a thick, heavy-duty modular mounting bracket consisting of two sturdy protruding L-shaped mounting tabs (15mm wide, 6mm thick) spaced 80mm apart, each with a 3.2mm M3 bolt hole, designed to securely bolt on a separate front ultrasonic sonar bumper later (do NOT generate the bumper itself). Second Floor (Top Turret Deck): Elevated 45mm above the top surface of the first floor, supported by four 10mm-diameter vertical cylindrical pillars at the four corners of the top deck. The top plate is a flat rectangle measuring 140mm in length (Y-axis), 130mm in width (X-axis), and 4mm thick. Feature hexagonal honeycomb weight-reduction cutouts across the rear two-thirds, two elongated side cable-routing slots, and a solid, flat mounting pad at the front center for a pan-tilt turret. Clean solid CAD topology, watertight manifold geometry, no curved overhangs, no loose floating parts.
Parameters
| Name | Value | Range |
|---|---|---|
| First floor width X | 200 mm | 100 – 300 |
| First floor length Y | 140 mm | 80 – 240 |
| Floor thickness | 4 mm | 2 – 10 |
| Mounting leg diameter | 10 mm | 6 – 20 |
| Mounting leg height | 15 mm | 5 – 40 |
| Leg spacing X | 60 mm | 20 – 160 |
| Leg spacing Y | 90 mm | 30 – 200 |
| M3 leg bolt clearance | 3.2 mm | 2.5 – 6 |
| Rear cable pass-through | 25 mm | 10 – 50 |
| Rear cable hole Y offset | -45 mm | -60 – 0 |
| First floor slot X offset | 55 mm | 20 – 80 |
| First floor slot Y offset | 20 mm | -40 – 50 |
| First floor slot length Y | 35 mm | 10 – 80 |
| First floor slot width X | 8 mm | 3 – 15 |
| Bracket spacing X | 80 mm | 40 – 140 |
| Bracket tab width X | 15 mm | 8 – 30 |
| Bracket material thickness | 6 mm | 3 – 12 |
| Bracket forward protrusion | 18 mm | 8 – 40 |
| Bracket riser above floor top | 22 mm | 8 – 50 |
| M3 bracket clearance | 3.2 mm | 2.5 – 6 |
| Pillar diameter | 10 mm | 5 – 20 |
| Gap first top to second bottom | 45 mm | 20 – 100 |
| Second floor width X | 130 mm | 80 – 220 |
| Second floor length Y | 140 mm | 80 – 240 |
| Second floor thickness | 4 mm | 2 – 10 |
| Pillar inset from top deck edge | 10 mm | 5 – 30 |
| Side slot X offset | 55 mm | 20 – 100 |
| Side slot Y centre | 20 mm | -40 – 60 |
| Side slot length Y | 30 mm | 10 – 80 |
| Side slot width X | 6 mm | 3 – 15 |
| Hex cutout circumradius | 4.5 mm | 2 – 10 |
| Hex pitch X | 14 mm | 6 – 30 |
| Hex pitch Y | 11 mm | 6 – 30 |
| Honeycomb edge margin | 20 mm | 8 – 40 |
| Turret pad square size | 50 mm | 20 – 100 |
| Turret pad Y centre | 42 mm | -20 – 70 |
| Turret pad height | 2 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
