Brackets and mounts
Tablet Wall Mount Bracket
- Bounding box
- 316 × 16 × 104 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Dimensions (H x W x D) 7.2mm x 186.8mm x 305.9mm / 0.28″ x 7.35″ x 12.04″ Lenovo Chromebook Duet 5 13” Design a wall mount bracket/sleeve for a widescreen tablet. The tablet will slide in from the top. Key dimensions for the internal slot: - Internal width: 308 mm (to fit a 305.9mm tablet with clearance) - Internal depth/thickness: 8.0 mm (to fit a 7.3mm tablet with clearance) - Internal height/sleeve depth: 100 mm (to hold the bottom half securely while leaving the top open) Design features: - Solid back plate with two 4.5mm countersunk screw holes spaced 150mm apart for wall mounting. - Wall thickness of the bracket should be 4 mm for strength. - Open top for easy sliding, open front cutout to keep the screen visible, and a 15mm retaining lip on the front to stop the tablet from falling forward. - Slightly rounded corners (fillets) for safety and a clean look.
Parameters
| Name | Value | Range |
|---|---|---|
| Internal width | 308 mm | 200 – 400 |
| Internal depth/thickness | 8 mm | 5 – 15 |
| Internal height/sleeve depth | 100 mm | 50 – 200 |
| Wall thickness | 4 mm | 2 – 8 |
| Retaining lip height | 15 mm | 5 – 30 |
| Screw hole spacing | 150 mm | 50 – 250 |
| Screw hole diameter | 4.5 mm | 3 – 8 |
| Corner fillet radius | 4 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o