Enclosures and housings
Tablespoon with Rose Embossment
- Bounding box
- 195.1 × 41.6 × 25.8 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable tablespoon, 180 mm long overall. The spoon bowl should be 60 mm long, 40 mm wide, and approximately 10 mm deep, with smoothly rounded edges. The handle should be about 120 mm long, 18 mm wide near the bowl, tapering to 14 mm wide. Make all sections at least 3 mm thick. At the end of the handle, create a raised rose approximately 28 mm in diameter with clearly defined overlapping petals. Integrate the rose and spoon into one solid watertight body. Design the entire model to print flat on its underside with no supports. Avoid unsupported overhangs greater than 45 degrees, bridges, floating geometry, and undercuts. The rose should be a shallow embossed relief rather than a fully sculpted flower.
Parameters
| Name | Value | Range |
|---|---|---|
| Handle Length | 120 mm | 80 – 200 |
| Bowl Length | 60 mm | 30 – 100 |
| Bowl Width | 40 mm | 20 – 60 |
| Bowl Depth | 10 mm | 5 – 20 |
| Handle Width (Bowl End) | 18 mm | 10 – 30 |
| Handle Width (Tail End) | 14 mm | 8 – 25 |
| Bowl Area Base Thickness | 13 mm | 5 – 25 |
| Handle Tail Thickness | 6 mm | 3 – 20 |
| Rose Diameter | 28 mm | 15 – 50 |
| Rose Base Height (Cone) | 7 mm | 3 – 15 |
| Central Bud Radius | 6 mm | 3 – 12 |
| Outer Petal Radius | 4 mm | 2 – 10 |
| Number of Outer Petals | 6 | 4 – 12 |
| Bowl Rim Fillet Radius | 1.5 mm | 0 – 3 |
| Rose Base Fillet Radius | 0.8 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox