Enclosures and housings
T-Shaped Circular Ring
- Bounding box
- 34 × 34 × 5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D-printable, T-shaped circular ring component with the following dimensions: Main cylindrical ring: Outer diameter: 30 mm Inner diameter: 26 mm Total height: 5 mm Bottom flange: The flange must be positioned at the bottom side of the ring. It must extend radially outward by 2 mm from the outer wall of the main ring. Total flange outer diameter: 34 mm. Flange thickness: 1.5 mm. The flange must extend continuously around the entire circumference. The flange must be integrated into the total height of 5 mm, not added below or above it. Cross-sectional geometry: The component must have a T-shaped cross-section when viewed from the side. The vertical section forms a hollow cylindrical ring. The horizontal section forms a flat circular flange at the bottom. The central opening must remain completely unobstructed, with a continuous 26 mm through-hole. The flange must connect to the bottom outer edge of the cylindrical ring. Manufacturing requirements: All features must be perfectly concentric. Use exact metric dimensions in millimeters. Create one single, watertight, manifold solid. Ensure the geometry is suitable for FDM 3D printing. No additional chamfers, fillets, grooves or decorative details.
Parameters
| Name | Value | Range |
|---|---|---|
| Main outer diameter | 30 mm | 20 – 200 |
| Main inner diameter | 26 mm | 20 – 199 |
| Total height | 5 mm | 2 – 20 |
| Flange thickness | 1.5 mm | 1 – 4 |
| Flange outward extension | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,