Brackets and mounts
Syringe Feeding Caddy
- Bounding box
- 150 × 111.2 × 142 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a syringe caddy to hold feeding syringes from pic solution, with holes for 50ml syringes and 100ml syringes. Add 2 supports to clamp the extension tube, just like in the image. Add 2 "holes" where you can add a strap to hold the caddy in a pole support
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 150 mm | 80 – 220 |
| Overall depth | 110 mm | 60 – 180 |
| Base tray height | 26 mm | 10 – 80 |
| Height to top of plate | 130 mm | 60 – 250 |
| Wall thickness | 3.6 mm | 2 – 8 |
| Top plate thickness | 5 mm | 3 – 12 |
| 50 ml syringe hole | 32 mm | 20 – 60 |
| 100 ml syringe hole | 42 mm | 20 – 80 |
| 50 ml holes offset from centre | 45 mm | 20 – 90 |
| Syringe row offset from centre | 24 mm | 0 – 60 |
| Small accessory hole diameter | 13 mm | 6 – 30 |
| Small hole column offset | 32 mm | 10 – 70 |
| First small hole row | -10 mm | -40 – 20 |
| Small hole row spacing | 24 mm | 10 – 50 |
| Extension tube diameter | 6 mm | 2 – 16 |
| Clamp wall thickness | 2.4 mm | 1.2 – 6 |
| Clamp opening width | 4.5 mm | 2 – 12 |
| Clamp height | 12 mm | 5 – 30 |
| Clamp X offset | 58 mm | 20 – 90 |
| Clamp Y offset | -38 mm | -60 – 20 |
| Strap hole diameter | 9 mm | 4 – 20 |
| Strap hole X offset | 60 mm | 20 – 95 |
| Strap hole Y offset | 46 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
