Enclosures and housings
SYN Honeycomb-Backed Silver Pendant
- Bounding box
- 94.3 × 86.3 × 6.3 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
All-white flooded in 925 silver, 3.5 inches wide with stones on the sides. Before we drop the CAD, we need to ensure the build quality matches exactly. I do not want a completely empty hollow inside; it sounds too light and cheap. Please build a dense honeycomb mesh structure inside behind that solid backplate. Keep the face walls at a strict 1.2mm to 1.5mm so the prongs stay rigid, and laser-weld the edges completely seamless so no water gets inside. Since the honeycomb will make this piece heavy, please ensure the bail is reinforced and thick enough to support the extra weight. For the stones, the cuts must be exact: • Material: VVS1 Moissanite (D-Color / Colorless). • Round Stones: Hearts & Arrows (H&A) Cut ONLY. • Fancy Shapes (Pear/Marquise Clusters): Crushed Ice Cut with zero dark "bow-ties." • Baguettes / Rectangular Cuts: Crushed Ice / High-Density Step Cut. Lastly, for the finish: this is a large piece and I want to protect it from sweat and cologne. Can we do a Palladium undercoat with multiple heavy layers of Rhodium plating? I want maximum tarnish resistance so it doesn't get dull.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (3.5 in) | 88.9 mm | 50 – 140 |
| Body Height | 55 mm | 30 – 90 |
| Outline Lobe Depth | 0.06 ratio | 0 – 0.15 |
| Outline Lobes | 8 count | 4 – 16 |
| Face Wall Thickness | 1.35 mm | 1.2 – 1.5 |
| Backplate Thickness | 1.2 mm | 0.9 – 2.5 |
| Honeycomb Core Depth | 3.6 mm | 2 – 8 |
| Honeycomb Cell (Across Flats) | 4.5 mm | 2.5 – 9 |
| Honeycomb Rib Width | 0.85 mm | 0.5 – 2 |
| Solid Rim Around Mesh | 2.4 mm | 1 – 6 |
| Bail / Crown Height | 18 mm | 8 – 35 |
| Bail Base Width | 22 mm | 10 – 40 |
| Bail Top Width | 13 mm | 6 – 30 |
| Bail Thickness (Reinforced) | 3.6 mm | 2 – 8 |
| Chain Hole Diameter | 5.6 mm | 3 – 12 |
| Seamless Edge Fillet | 0.8 mm | 0 – 1.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no