Brackets and mounts
Symmetric Y-Axis Bracket
- Bounding box
- 122.3 × 145.5 × 58.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Symmetric bracket in mm, symmetric about the Y axis. Base plate, 15 mm thick (Z 0 to 15): egg-shaped outline enclosing three circles: one of diameter 62.64 at the origin, and two of diameter 38.18 centered at X = -31 and X = 31, Y = -95.07. Total width 100.18, total height 145.48. Concave arc of radius 38.9 between the two lower circles. Top boss: cylinder diameter 62.64 at the origin, Z -15 to 40. Center hole diameter 21. Nine holes of diameter 7.57 on a pitch circle of diameter 39.9. Lower bosses: two cylinders diameter 38.18 at (-31, -95.07) and (31, -95.07), Z -18 to 36. Hole diameter 19.09 in each. Arm grooves: from the top boss center to each lower boss center, 7 mm wide, 6 mm deep from the top face of the plate.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Thickness | 15 mm | 5 – 30 |
| Top Boss Diameter | 62.64 mm | 20 – 100 |
| Top Boss Bottom Z | -15 mm | -30 – 0 |
| Top Boss Top Z | 40 mm | 10 – 70 |
| Lower Boss Diameter | 38.18 mm | 10 – 80 |
| Lower Boss Bottom Z | -18 mm | -30 – 0 |
| Lower Boss Top Z | 36 mm | 10 – 70 |
| Lower Boss X Offset | 31 mm | 10 – 60 |
| Top-to-Lower Center Distance | 100 mm | 60 – 150 |
| Interior Arm Width | 20 mm | 8 – 50 |
| Side Arc Radius | 70 mm | 55 – 150 |
| Side Web Width | 8 mm | 2 – 20 |
| Bottom Concave Arc Radius | 38.9 mm | 20 – 80 |
| Arm Groove Width | 7 mm | 2 – 20 |
| Arm Groove Depth | 6 mm | 1 – 14 |
| Top Center Bore Diameter | 21 mm | 5 – 50 |
| Lower Bore Diameter | 19.09 mm | 5 – 40 |
| Bolt Hole Count | 9 mm | 2 – 20 |
| Bolt Circle Diameter | 39.9 mm | 20 – 60 |
| Bolt Hole Diameter | 7.57 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
