Enclosures and housings
Symmetric Spherical Vase
- Bounding box
- 260 × 260 × 280 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, symmetrical, hollow 3D-printable ceramic vase matching the supplied reference image. DIMENSIONS: * Total height: 280 mm * Maximum body diameter: 260 mm * Neck outer diameter: 100 mm * Neck height: 30 mm * Wall thickness: 2 mm * Bottom thickness: 3 mm BODY GEOMETRY: * Wide, full, rounded, almost spherical body. * Maximum diameter at the middle of the body. * Smoothly rounded lower part with a slightly flattened base. * Broad curved shoulders that gradually narrow toward the neck. * Short, smooth transition between shoulders and neck. * The body must be compact and rounded, not elongated, pear-shaped or bottle-shaped. * Perfect rotational symmetry around the vertical axis. NECK: * Straight cylindrical neck. * Outer diameter 100 mm. * Height 30 mm. * Open top. * Slightly rounded upper rim. * Smooth surface without decoration. LEAF DECORATION: * Cover the entire visible body with a regular repeating pattern of identical elongated pointed leaves. * Each leaf approximately 20 mm high and 10 mm wide. * Each leaf has two sharp ends and gently curved convex sides, resembling a narrow pointed teardrop. * Keep the long axis of each leaf approximately vertical. * Arrange leaves in evenly spaced staggered rows around the entire circumference. * Adjacent rows must be offset by half the spacing. * Keep leaf size, shape and spacing consistent. * Continue the pattern smoothly over the curved shoulders. * Do not place leaves on the neck or bottom rim. ENGRAVING: * Each leaf is a closed recessed outline, not a raised shape. * Groove depth: 0.2 mm. * Groove width: 0.55 mm. * No holes, no cutouts, no raised scales and no additional textures. * The engraving must be subtle and delicate. PRINTABILITY: * Hollow watertight single-piece model. * Maintain 2 mm wall thickness beneath the engraved pattern. * Maintain 3 mm bottom thickness. * Smooth continuous surfaces. * No disconnected geometry. * Preserve all decorative details. IMPORTANT: Prioritize the exact vase silhouette, proportions and leaf pattern described above. Do not replace the design with a generic vase. Do not simplify the body into a pear shape or elongated bottle shape.
Parameters
| Name | Value | Range |
|---|---|---|
| Total height | 280 mm | 100 – 500 |
| Maximum body diameter | 260 mm | 40 – 400 |
| Neck outer diameter | 100 mm | 20 – 200 |
| Neck height | 30 mm | 5 – 100 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Bottom thickness | 3 mm | 1.2 – 10 |
| Flat base diameter | 140 mm | 40 – 300 |
| Leaf length | 20 mm | 5 – 40 |
| Leaf width | 10 mm | 2 – 25 |
| Engraving depth | 0.2 mm | 0.05 – 1 |
| Engraving groove width | 0.55 mm | 0.2 – 2 |
| Leaf rows | 18 mm | 6 – 30 |
| Total leaves | 720 mm | 56 – 1500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,