Brackets and mounts
Symmetric Bracket Plate
- Bounding box
- 107.6 × 145.5 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric symmetric bracket plate, all units in mm, symmetric about the vertical Y axis. Top boss: center at the origin, outer diameter 62.64, central through-bore diameter 21.00. On this boss add a circular pattern of 9 equally spaced through-holes of diameter 7.57 on a pitch circle diameter of 39.90. Two lower bosses: outer diameter 38.18, through-bore diameter 19.09. Their centers are 31.00 mm to the left and right of the symmetry axis, and each center is 100.00 mm from the top boss center (about 95.07 mm below it). Connect the top boss to each lower boss with a straight arm 7.00 mm wide, running center to center. The outer side contours are arcs of radius 110.00. Between the two lower bosses cut a concave arc of radius 38.90. Round the inner corners with fillets of radius 10.00. Extrude the plate to a thickness of 15.00 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Boss OD | 62.64 mm | 30 – 120 |
| Top Bore Diameter | 21 mm | 5 – 50 |
| Bolt Hole Count | 9 count | 1 – 24 |
| Bolt Hole Diameter | 7.57 mm | 2 – 20 |
| Bolt Circle Diameter | 39.9 mm | 10 – 80 |
| Lower Boss OD | 38.18 mm | 20 – 100 |
| Lower Bore Diameter | 19.09 mm | 4 – 60 |
| Lower Boss X Offset | 31 mm | 5 – 100 |
| Top-to-Lower Center Distance | 100 mm | 30 – 250 |
| Connecting Arm Width | 7 mm | 2 – 30 |
| Outer Side Arc Radius | 110 mm | 50 – 400 |
| Outer Side Web Width | 12 mm | 3 – 40 |
| Lower Concave Arc Radius | 38.9 mm | 10 – 150 |
| Inner Corner Fillet Radius | 10 mm | 0.5 – 25 |
| Plate Thickness | 15 mm | 3 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
