Enclosures and housings
Sweeper Chassis Shell
- Bounding box
- 160.0 × 120.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular hollow chassis shell, 160mm long, 120mm wide, and 60mm high, with a uniform 3mm wall thickness. The bottom face and the front face must be completely open. Add a vertical internal dividing wall, 3mm thick, located 60mm from the front opening, spanning the entire inner width and height to separate the front sweeper compartment from the rear dustbin. On both the left and right side walls, located 40mm from the rear face and 20mm from the bottom edge, cut a 5.5mm diameter circular through-hole for the drive motor shafts. On the left side wall only, located 30mm from the front open edge and 30mm from the bottom edge, cut a 5.5mm diameter circular through-hole for the sweeping brush motor.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (X) | 160 mm | 60 – 400 |
| Overall Width (Y) | 120 mm | 40 – 300 |
| Overall Height (Z) | 60 mm | 30 – 200 |
| Wall Thickness | 3 mm | 1.5 – 10 |
| Divider Offset From Front | 60 mm | 10 – 150 |
| Divider Thickness | 3 mm | 1.5 – 10 |
| Drive Motor Hole Dia. | 5.5 mm | 2 – 20 |
| Motor Hole From Rear Face | 40 mm | 5 – 200 |
| Motor Hole From Bottom Edge | 20 mm | 5 – 150 |
| Brush Motor Hole Dia. | 5.5 mm | 2 – 20 |
| Brush Hole From Front Edge | 30 mm | 5 – 150 |
| Brush Hole From Bottom Edge | 30 mm | 5 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no