Enclosures and housings
Surgical Reamer Drive Shaft
- Bounding box
- 14.0 × 8.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Model a surgical reamer drive shaft as a single solid part. Units: mm. Material: 316L stainless steel. Origin at the centre of the rear end face; the shaft axis runs along +Z. Main body: solid round bar, diameter 8, length 220 (Z 0 to Z 220). Rear drive end (Z 0 to Z 25): cut two parallel flats, one on each side (normal to X), leaving 6.5 mm across the flats. This double-D shape is gripped by the chuck. Add a 0.5 mm x 45 degree chamfer on the rear end face. Front bayonet end: drill a 3 mm diameter cross hole straight through the shaft along the X axis, centred at Z 214. Press a 3 mm diameter x 14 mm long dowel pin into it, centred, so 3 mm sticks out on each side. Model the pin as part of the same solid. Add a 0.5 mm x 45 degree chamfer on the front end face. The section from Z 30 to Z 200 must stay a plain 8 mm cylinder with no features (it slides through bushings). Note it as diameter 8 h6, polished.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter (h6, polished) | 8 mm | 4 – 20 |
| Overall Shaft Length | 220 mm | 50 – 400 |
| Rear Double-D Length | 25 mm | 5 – 50 |
| Across Flats | 6.5 mm | 4 – 7.5 |
| End Chamfer (45 deg) | 0.5 mm | 0.1 – 1 |
| Cross Dowel Pin Diameter | 3 mm | 1 – 5 |
| Cross Dowel Pin Length | 14 mm | 6 – 30 |
| Cross Pin Z Position | 214 mm | 150 – 218 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
