Mechanical parts
Suport reforcat de balda per a armari 16mm
- Bounding box
- 80 × 110 × 120 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Suport lateral d'una peça per sostenir una balda de conglomerat de 560x350x16 mm dins d'un armari amb laterals de 16 mm. Fixació a cada lateral amb dos cargols, espiga horitzontal de 100 mm sota la balda i reforços.
Parameters
| Name | Value | Range |
|---|---|---|
| Fons de la balda | 350 mm | 150 – 450 |
| Gruix de la balda | 16 mm | 12 – 30 |
| Amplada placa vertical | 80 mm | 60 – 120 |
| Alçada placa vertical | 120 mm | 80 – 160 |
| Gruix placa | 10 mm | 6 – 16 |
| Diàmetre espiga | 16 mm | 12 – 24 |
| Longitud espiga sota balda | 100 mm | 60 – 140 |
| Alçada centre espiga des de baix | 66 mm | 45 – 100 |
| Gruix reforços laterals | 10 mm | 6 – 16 |
| Separació vertical cargols | 70 mm | 45 – 90 |
| Diàmetre forats cargols | 5.5 mm | 4.5 – 8 |
| Distància forat a extrem placa | 12 mm | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Frame Drone 5 inch Stretched X (1503, FC 30.5, TOF, Arm Polos)
Frame drone 5 inch stretched X persegi panjang, motor 1503 3 baut, ujung arm bentuk X polos tanpa cekungan, FC 30.5, spacer, lubang TOF
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
