Mechanical parts
Suport reforçat per balda de conglomerat 16 mm
- Bounding box
- 128 × 100 × 96 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Suport de balda tipus vareta invisible, amb placa vertical cargolada a una paret lateral de conglomerat de 16 mm, braç horitzontal i nervis triangulars, pensat per imprimir en PETG. Balda 560 x 350 x 16 mm; fer servir dos suports, un a cada lateral de l'armari.
Parameters
| Name | Value | Range |
|---|---|---|
| Profunditat de balda | 350 mm | 200 – 450 |
| Gruix de la balda | 16 mm | 12 – 25 |
| Voladís de suport sota balda | 100 mm | 60 – 140 |
| Amplada de placa a paret | 90 mm | 60 – 140 |
| Alçada placa a paret | 72 mm | 50 – 100 |
| Gruix placa | 12 mm | 8 – 18 |
| Diàmetre del braç | 22 mm | 16 – 30 |
| Gruix nervis | 12 mm | 8 – 16 |
| Diàmetre forats cargols | 5.5 mm | 4.5 – 7 |
| Separació vertical cargols | 46 mm | 30 – 60 |
| Forat per cargol a balda | 4.5 mm | 3.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Frame Drone 5 inch Stretched X (1503, FC 30.5, TOF, Arm Polos)
Frame drone 5 inch stretched X persegi panjang, motor 1503 3 baut, ujung arm bentuk X polos tanpa cekungan, FC 30.5, spacer, lubang TOF
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
