Brackets and mounts
Subway Plug Door Assembly
- Bounding box
- 1600 × 119.5 × 1990 mm
- Engine
- 3D Printing B-rep
- Parameters
- 37
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete subway plug door assembly, including one door leaf, one top horizontal guide rail, two door carrier brackets with rollers, one bottom stop block. Door leaf: 1300mm wide, 1850mm high, 40mm thick, with central window 1000×1100mm. Guide rail length 1600mm, with sliding groove. Two carriers slide on the rail and connect to the top of door leaf. All parts are separate solid bodies, no merge.
Parameters
| Name | Value | Range |
|---|---|---|
| Door width | 1300 mm | 800 – 1600 |
| Door height | 1850 mm | 1200 – 2200 |
| Door thickness | 40 mm | 20 – 80 |
| Door corner radius | 10 mm | 0 – 30 |
| Window width | 1000 mm | 400 – 1200 |
| Window height | 1100 mm | 400 – 1400 |
| Window centre height | 1000 mm | 400 – 1400 |
| Window corner radius | 30 mm | 0 – 60 |
| Rail length | 1600 mm | 1000 – 2000 |
| Rail height | 80 mm | 40 – 120 |
| Rail depth | 60 mm | 30 – 100 |
| Rail underside above door top | 60 mm | 20 – 120 |
| Sliding groove width | 26 mm | 10 – 50 |
| Sliding groove depth | 22 mm | 8 – 40 |
| Rail corner radius | 8 mm | 0 – 20 |
| Bracket width | 120 mm | 60 – 200 |
| Bracket depth | 80 mm | 40 – 120 |
| Clamp side plate thickness | 20 mm | 8 – 30 |
| Clamp side plate height | 50 mm | 20 – 100 |
| Clamp bridge height | 10 mm | 4 – 20 |
| Riser height | 35 mm | 10 – 60 |
| Riser depth | 30 mm | 10 – 60 |
| Top plate thickness | 10 mm | 4 – 20 |
| Bracket centre from door centre | 520 mm | 0 – 650 |
| Assembly overlap | 0.5 mm | 0.2 – 1 |
| Roller diameter | 40 mm | 20 – 60 |
| Roller width | 16 mm | 8 – 30 |
| Roller centre spacing | 70 mm | 30 – 100 |
| Stop block width | 100 mm | 40 – 160 |
| Stop block depth | 60 mm | 30 – 100 |
| Stop block height | 50 mm | 20 – 100 |
| Stop block corner radius | 8 mm | 0 – 20 |
| Mounting hole diameter | 6.5 mm | 3 – 10 |
| Counterbore diameter | 12 mm | 6 – 20 |
| Counterbore depth | 6 mm | 2 – 15 |
| Mounting hole offset from centre | 30 mm | 10 – 50 |
| Door contact overlap | 0.5 mm | 0.2 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl