Enclosures and housings
Subobot Robot Car Assembly
- Bounding box
- 151.1 × 130.0 × 36.1 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
I want make an original robot car for subobot competition, main part is a box which load both motors with screw but outside the box, then, this box is joined to floor of car where is alocated the battery box. Front side is a laminar piece which is an angle with floor.
Parameters
| Name | Value | Range |
|---|---|---|
| Floor Length | 150 mm | 50 – 500 |
| Floor Width | 100 mm | 50 – 300 |
| Floor Thickness | 5 mm | 2 – 20 |
| Motor Box Length | 50 mm | 30 – 200 |
| Motor Box Width | 40 mm | 20 – 150 |
| Motor Box Height | 30 mm | 20 – 150 |
| Motor Box Rear Offset | 20 mm | 5 – 100 |
| Motor Diameter | 25 mm | 10 – 100 |
| Motor Length | 30 mm | 10 – 150 |
| Motor Shaft Diameter | 4 mm | 2 – 20 |
| Motor Shaft Length | 10 mm | 5 – 50 |
| Battery Box Length | 60 mm | 30 – 200 |
| Battery Box Width | 40 mm | 20 – 150 |
| Battery Box Height | 30 mm | 20 – 150 |
| Front Piece Length | 100 mm | 50 – 300 |
| Front Piece Width | 30 mm | 10 – 100 |
| Front Piece Thickness | 3 mm | 1 – 10 |
| Front Piece Angle | 45 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox